User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Wi-Fi Extender
- 02 /
- CONNECTING YOUR Fios Home Wi-Fi Extender
- 2.0/ Setting up Your Fios Home Wi-Fi Extender
- 2.1/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING ADVANCED SETTINGS
- 4.0/ Using Advanced Settings
- 4.1/ Management
- 4.2/ Admin Password
- 4.3/ Factory Default
- 4.4/ System Log
- 4.5/ Advanced Log
- 4.6/ DHCP Log
- 4.7/ BHM Log
- 05 /
- TROUBLE
- SHOOTING
- 5.0/ Troubleshooting Tips
- 5.1/ Frequently Asked Questions
- 06 /
- SPECIFICATIONS
- 6.0/ General Specifications
- 6.1/ LED Indicators
- 6.2/ Environmental Parameters
- 7 /
- NOTICES
- 7.0/ Regulatory Compliance Notices
OVERVIEW
./ OVERVIEW
Your Fios Home Wi-Fi Extender provides you with wireless
connectivity using the 802.11b, g, n, ac or ax standards. These are
the most common wireless standards.
802.11b has a maximum data rate of 11 Mbps, 802.11g has a
maximum data rate of 54 Mbps, 802.11n has a maximum data rate
of 600 Mbps, 802.11ac has a maximum data rate of 1.73 Gbps, and
802.11ax has a maximum data rate of 4.8 Gbps.
802.11b and g standards operate in the 2.4 GHz range. 802.11ac
operates in the 5 GHz range. 802.11n and ax operates in both the
2.4 GHz and 5 GHz ranges.
Note: 802.11 b is a legacy mode and is not recommended. Even
one 802.11b device connected to the network will slow your entire
wireless network.
The wireless service and wireless security are activated by default.
The level of security is preset to WPA2 encryption using a unique
default WPA2 key (also referred to as a passphrase or password)
pre-configured at the factory. This information is displayed on a
sticker located on the rear of your router.