User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Wi-Fi Extender
- 02 /
- CONNECTING YOUR Fios Home Wi-Fi Extender
- 2.0/ Setting up Your Fios Home Wi-Fi Extender
- 2.1/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING ADVANCED SETTINGS
- 4.0/ Using Advanced Settings
- 4.1/ Management
- 4.2/ Admin Password
- 4.3/ Factory Default
- 4.4/ System Log
- 4.5/ Advanced Log
- 4.6/ DHCP Log
- 4.7/ BHM Log
- 05 /
- TROUBLE
- SHOOTING
- 5.0/ Troubleshooting Tips
- 5.1/ Frequently Asked Questions
- 06 /
- SPECIFICATIONS
- 6.0/ General Specifications
- 6.1/ LED Indicators
- 6.2/ Environmental Parameters
- 7 /
- NOTICES
- 7.0/ Regulatory Compliance Notices
TROUBLESHOOTING TIPS
5.0e/ LAN CONNECTION FAILURE
To troubleshoot a LAN connection failure:
• Verify your Fios Home Wi-Fi Extender is properly installed, LAN
connections are correct, and that the Fios Home Wi-Fi Extender
and communicating network devices are all powered on.
• Confirm that the computer and Fios Home Wi-Fi Extender are
both on the same network segment.
If unsure, let the computer get the IP address automatically
by initiating the DHCP function, then verify the computer is
using an IP address within the default range of 192.168.1.2
through 192.168.1.254. If the computer is not using an IP
address within the correct IP range, it will not connect to your
Fios Home Wi-Fi Extender.
• Verify the subnet mask address is set to 255.255.255.0.
5.0f/ TIMEOUT ERROR OCCURS WHEN ENTERING THE URL OR
IP ADDRESS
Verify the following:
• All computers are working properly.
• IP settings are correct.
• Fios Home Wi-Fi Extender is on and connected properly.
• Fios Home Wi-Fi Extender settings are the same as the
computer.