User's Guide

 / INTRODUCTION

The WPS button is used to initiate Wi-Fi Protected Setup. This

is an easy way to add WPS capable devices to your wireless

network. To activate the WPS function, press and hold the uniﬁed

button located on the front of your Fios Home Wi-Fi Extender

for more than 2 seconds. When WPS is initiated from your

Fios Home Wi-Fi Extender, the Status LED slowly ﬂashes blue

for up to two minutes, allowing time to complete the WPS pairing

process on your wireless device (also known as a wireless client).

When a device begins connecting to your Fios Home Wi-Fi Extender

using WPS, the Status LED rapidly ﬂashes blue for a few seconds,

and turns solid blue and then solid white as the connection

completes.

If there is an error during the WPS pairing process, the Status LED

slowly ﬂashes red for two minutes after the error occurs.

Refer to the “Connecting A Wi-Fi Device Using WPS” for more

details. In addition, the uniﬁed button also provides a quick view of

the operational state of the Fios Home Wi-Fi Extender using various

colors as indicated in the chart of “Status LED” on page 8.

Please refer to section 5.0h for details on the rear LEDs.

1.3b/ REAR PANEL

The rear panel of your Fios Home Wi-Fi Extender has a label

that contains important information about your device, including

the default settings for the Fios Home Wi-Fi Extender’s wireless

network name (SSID), wireless password (WPA2 key), local URL for

accessing the Fios Home Wi-Fi Extender’s administrative pages,