User Manual

[e-mail]
Your instruction system is ready for use
All systems have been tested and set for first use
Switch On/Off transmitter: Switch up is on; switch down is
off, one digit number on the left screen for volume display and
double digit number on the right screen for channel display.
You can switch on the receiver by pressing the on / off
switch (1) and hold it for a moment until the LED starts flashing.
Channel Setting: The equitrainer receiver without channel
and volume display, they are all (channel, volume and mode)
can be showed in transmitter.
Transmitter has two functions:
Manager Function and Transmitter Function.
The first step is Manager function of Transmitter
：
We use the transmitter as manager function by using
combination button setting (“FUN” and “Switch on” button), you
can use the button “up” and “down” (“∧”and “∨”)
for channel setting. When you finished setting the channel on
transmitter, turn on receiver you will see the red indicator
light are flickering, that is to say they had in same channel already.
And then switch off transmitter and switch on again,
when you see the red indicator light of receiver are quick
flickering, they will receive signal and in the working mode.
The second step is normal working mode: When you finished
setting the channel on transmitter and receivers by
using manager function, turn off transmitter and turn on it again,
they are all in working mode and you can use them
normally.
(The transmitter and receivers have memory function, once
channel setting successfully, they will match
automatically in same channel when you use them next time and
do not have to set again)
Transmitter volume Control: When transmitter is switch
on, use “∧”and “∨” to adjust volume.
For example: Choose from 1- 4 will transmit a larger sound for
audio data input.
Receiver volume Control: Press the volume control button
to adjust for suitable volume.
Charging: When you switch on the receiver, the red indicator
light is become slow flickering, it means the battery
low or out of battery, the receiver needs to be charged.
Switch receiver off, press the on / off switch and hold until LED
no longer flickers and turns red.
Reminding:
Please make sure all devices in the state of switch off when
charging. The red indicator light of equitrainer
receiver will be keep flickering when on the charging, when the
red indicator light keep on and stop flickering,
which is full charged.
Charging time is around 2-4 hours and please avoid over charge.
EQUITRAINER > EQUICOACH
Set channel when using the equitrainer in combination
with the equicoach.
Turn equicoach off (all units). Press and hold the V
button on one of the equicoach devices, then turn on
the equicoach, (and press and hold the v button)
The equicoach is now in manager function and with the
+ and -button you can set channel.
Now turn on the equitrainer and wait for the beep.
You have heard the beep ? , turn the equicoach off and
on again
If successful, you will see the LED flash quickly on the
equitrainer.
If you change the equicoach of channel, the above
must be repeated
The equitrainer only has a listening function !!!!!
Specifications:
Distance: 100-150 Meters
Channel: 100 Channels
Audio Input: Microphone/Audio(Line in)
Output: Earphone/Audio (3.5mm)
Power Supply: Lithium Battery Build in
Dimension: 70mm X 25mm X 12mm
Weight of equitrainer Receiver: 18 Grams
questions / comments
Axsolutions
Oranjestraat 1 H
4571 HN Axel
Netherlands
0031 6 5388 5390
[e-mail]
EQ UITRAINER