Manual

DIGITAL ALARM CLOCK 12v DC

OPERATING INSTRUCTIONS

Model: 30902

Display / PM Indicator / Alarm On Indicator

When the clock is plugged in, the display 12:00 is being displayed. The clock will automatically indicate AM/PM, but you must be sure to

correctly set the indicator for the time and alarm. When the PM indictor is on, it is "PM"; when the PM indicator is off, it indicates "AM", When

the Alarm Indicator is on, the alarm will sound at the time set. Once the snooze feature is activated, the alarm indicator will blink.

Set Time

To set the time, press the TIME SET (6) button and the HOUR SET (3) button until the correct hour is displayed (and the AM/PM is correct). then

release the HOUR SET (3) button and press the MINUTE SET (4) button until the correct time is displayed.

Set Alarm

set the alarm time, press and hold the ALARM SET (5) button and the HOUR SET (3) or MINUTE SET (4) button, as above. Be sure to set the

AM/PM properly too.

Snooze

Touch the SNOOZE bar (1) and get an extra 9 minutes to sleep. This may be repeated up to six times within one hour.

To Operate Alarm

Slide the ON/OFF switch (2) on the left of the clock to the ON position. The alarm will sound at the time set.

High /Low alarm sound

Slide the HI/ LO switch (7) on the right of the clock to the Hl or LOW position. The alarm will sound will be higher or lower

accordingly.

Battery Backup (Battery not included)

Install one 9V alkaline battery in the battery compartment using the battery connecter. Note this battery can be installed without disconnectìng

the clock power. If the power fails, the battery backup will automatically continue the time and alarm operation but the display will disappear.

During a power outage, the alarm will sound al the set time. When the power is restored the display digits will reappear with the correct time.

Please

help in preservation of the environment and return used batteries to an authorized depot.

Remove the battery from the clock if you do not intend to use for an extended period of time.

PAGE 1
DIGITAL ALARM CLOCK 12v DC OPERATING INSTRUCTIONS Model: 30902 Display / PM Indicator / Alarm On Indicator When the clock is plugged in, the display 12:00 is being displayed. The clock will automatically indicate AM/PM, but you must be sure to correctly set the indicator for the time and alarm. When the PM indictor is on, it is "PM"; when the PM indicator is off, it indicates "AM", When the Alarm Indicator is on, the alarm will sound at the time set.
PAGE 2
Two Year Warranty (U.S.A.) Equity products are warranted for two years from the date of consumer purchase against defects in material and workmanship. During this period such defects will be repaired, or the product will be replaced at Equity’s option. This warranty does not cover damage caused by misuse or negligence. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE.