User Manual

SOLAR HYBRID ALARM CLOCK

Model: 65903

FUNCTION:

1. Solar power and battery operated

day, date and alarm time or temperature (selectable)

2. 5 minutes repeating snooze

3. Green LED back-light

4. 12 hour or 24 hour format

BATTERY AND SOLAR POWER COSUMPTION AND UTILIZATION

This clock is designed to operate using two 1.5V alkaline batteries and solar power. It automatically switches between solar and

battery power depending in the lighting conditions and will extend normal battery life to 4-5 years if the clock is used in light at least

2000 lux for 10 hours per day,

INSTALL THE BATTERIES

1. Remove the battery compartment cover on the base of the clock.

2. Insert 2 PCS “AA” (1.5V) ALKALINE batteries noting the polarity as indicated inside the batteries compartment.

3. Replace the battery compartment cover.

SETTING THE CALENDAR

1. Press the RESET button (Located on the base of the clock) - to do this. Use a pin to push through the hole, The clock will now,

beep and display at 12:00 AM.

2. Slide the LOCK/ALARM/DATE/TIME switch (A) to the DATE SET position and the year/day/date digits will begin to flash .

3. Press the 12-24HR/YEAR button (C) to set the year.

4. Press the MINUTE/DATE button (D) to set the date.

5. Press the HOUR/MONTH button (E) to set the month.

6. After the CALENDAR has been set, slide the LOCK/ALARM/DATE/TIME switch to the LOCK position.

PAGE 1
SOLAR HYBRID ALARM CLOCK Model: 65903 FUNCTION: 1. Solar power and battery operated day, date and alarm time or temperature (selectable) 2. 5 minutes repeating snooze 3. Green LED back-light 4. 12 hour or 24 hour format BATTERY AND SOLAR POWER COSUMPTION AND UTILIZATION This clock is designed to operate using two 1.5V alkaline batteries and solar power.
PAGE 2
SETTING THE TIME 1. Slide the LOCK/ALARM/DATE/TIME switch (A) to the TIME SET position and the hour/minutes digits will begin to flash . 2. Press HOUR/MINUTE to set the hour. Please make sure AM/PM is correctly, the AM/PM will appear on the display for AM/PM time (in 12 hours format) 3. Press the MINUTE/DATE button to set the minute 4. After setting the correct time. Slide the LOCK/ALARM/DATE/TTME to the LOCK position. SETTING THE ALARM 1. Slide the LOCK/ALARM/DATE/TIME to the AL. SET ALARM position. 2.