Manual

34 OBD2

Using the Scan Tool

I/M READINESS TESTING

4. When a Monitor's Trip Drive Cycle is performed properly, the

Monitor icon on the Scan Tool’s display changes from "flashing" to

"solid,” indicating that the Monitor has run and finished its diagnos-

tic testing.

■ If, after the Monitor has run, the MIL on the vehicle's dash is not

lit, and no stored or pending codes associated with that particu-

lar Monitor are present in the vehicle's computer, the repair was

successful.

■ If, after the Monitor has run, the MIL on the vehicle's dash lights

and/or a DTC associated with that Monitor is present in the vehi-

cle's computer, the repair was unsuccessful. Refer to the vehi-

cle's service manual and recheck repair procedures.