Operation Guide
Table Of Contents
- Copyright Information
- Disclaimer
- Contents
- Diagram Index
- Table Index
- Notice
- User Service
- 1 Introduction
- 2 Interface and Component
- 3 Functions and Operation Instruction
- 3.1 Startup & Shutdown Button
- 3.2 Left and Right Buttons
- 3.3 Up and Down Buttons
- 3.4 Data Transmitting-receiving Indicator Light
- 3.5 3G/4G and Bluetooth Operating Condition
- 3.6 Instruction of Radio Startup and Power Indicator Light Conditions
- 3.7 Device Menu
- 3.7.1 Device Information
- 3.7.1 Device Information
- 3.7.2 Transmitting/Receiving Channel and Frequency
- 3.7.3 Data Protocol
- 3.7.4 RF Baud Rate
- 3.7.5 Transmitting/Receiving Mode
- 3.7.6 Transmitting Power
- 3.7.7 Serial Port Baud Rate
- 3.7.8 Serial Port Baud Rate Self-adaption
- 3.7.9 OLED Sleep Mode
- 3.7.10 Interference Detection
- 3.7.11 Language
- 3.7.11 Language
- 3.8 Use of Radio Configuration Software
- 3.9 Firmware Upgrade
- Appendix A Technical Indexes
- Appendix B Command
- Appendix C eRadio SIM Setup
- Appendix C eRadio SIM Setup
- Appendix D eRadio FAQ
1.1 Product Features
Main features of eRadio:
Full-band support, with the frequency point range of 410MHz -470MHz
Many options of transmitting power
Self-adaptive function of serial port baud rate
OLED display
5 user buttons
One-way RS232 interface
Bluetooth module
3G/4G module
3 bi-color status indicator lights
IP67 protection
Note:
Optional component.
1.2 Convention
The following conventions are used in this manual:
The characters following 0x are hexadecimal digits
The characters used by transmitted commands are case insensitive