User's Manual

In FM RADIO MODE, press the FF/REW button to

select a channel. Press the FF/REW button two

seconds (or longer). The frequency will go up/down

and will seek channels automatically (Auto-seeking

function).

After selecting a channel press the MODE button.

SAVE CH 01 will appear on the LCD display.

Press the PLAY/STOP button.

Press the FF/REW button to select YES , then

press the PLAY/STOP button to store channel.

The EVR-150 has the capacity to store 20

channels.

To overwrite FM channels, press the FF/REW

button to select your desired channel number when

the

SAVE CH 00 message is displayed. Then, the

UPDATE CH 00 message will be displayed on

LCD. Press the PLAY/STOP button and the

FF/REW button to select YES .

The FM tuner may not be function properly in weak transmission areas.

If you eaperience difficulty finding a clear FM frequency, or if there is a loud noise, try using a

longer earphone cable (earphone cables function as receiving antennae). Additionally,

rotating the earphone cable with the ground may improve FM reception.

Earphones are required for FM radio listening capability. (The internal speaker does not

function in FM radio listening mode.)