User guide
Table Of Contents
- Presentation
- Warning
- Copyright
- 1 References
- 2 Packaging
- 3 General presentation
- 4 Characteristics and Services
- 5 Use of the modem
- 5.1 Starting with the modem
- 5.2 Specific recommendations for the use of the modem in vehicles
- 5.3 GSM led of the modem
- 5.4 Echo function of AT commands deactivated
- 5.5 Checking the quality of the GSM reception signal
- 5.6 Verification of PIN code
- 5.7 Verification of modem registration on GSM network
- 5.8 Verification of modem registration on GPRS network
- 5.9 Verification of internal voltages of the modem
- 5.10 Main AT commands (HAYES)
- 5.11 Turning OFF the modem
- 5.12 Updating procedure of the modem
- 6 Trouble Shooting
- 7 Functional description
- 8 Technical characteristics
- 8.1 Mechanical characteristics
- 8.2 Electrical characteristics
- 8.3 Environmental characteristics
- 8.4 Standards/Conformities
- 9 Security recommendations
- 10 Recommended accessories
- 11 Client support
EG_GenPro25e_1055_UG_000_UK Page 13 / 66
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO & GENER reserves the right to make any modification.
Dct_427_01
TX
Transmit
TYP
TYPical
UTC
Universal Time Clock
VSWR
Voltage Stationary Wave Ratio
1.3 Symbols
The following symbols are used to highlight the important information of this user guide.
A symbol for the essential information about the module integration and performance.
A warning symbol indicates the actions that could harm or damage the module
2 Packaging
2.1 Content
The GenPro 25e is supplied with:
- a GenPro 25e cardboard packaging,
- a modem GenPro 25e,
- 2 fixing brackets,
- a 4-wire cable Red/Black/Yellow/Brown stripped with fuse mini Blade 2A/32V
- a 2-wire cable (Blue/Yellow) stripped.
- a technical sheet (Instructions Sheet).
Figure 1 : Content