User guide
Table Of Contents
- Presentation
- Warning
- Copyright
- 1 References
- 2 Packaging
- 3 General presentation
- 4 Characteristics and Services
- 5 Use of the modem
- 5.1 Starting with the modem
- 5.2 Specific recommendations for the use of the modem in vehicles
- 5.3 GSM led of the modem
- 5.4 Echo function of AT commands deactivated
- 5.5 Checking the quality of the GSM reception signal
- 5.6 Verification of PIN code
- 5.7 Verification of modem registration on GSM network
- 5.8 Verification of modem registration on GPRS network
- 5.9 Verification of internal voltages of the modem
- 5.10 Main AT commands (HAYES)
- 5.11 Turning OFF the modem
- 5.12 Updating procedure of the modem
- 6 Trouble Shooting
- 7 Functional description
- 8 Technical characteristics
- 8.1 Mechanical characteristics
- 8.2 Electrical characteristics
- 8.3 Environmental characteristics
- 8.4 Standards/Conformities
- 9 Security recommendations
- 10 Recommended accessories
- 11 Client support
EG_GenPro25e_1055_UG_000_UK Page 8 / 66
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO & GENER reserves the right to make any modification.
Dct_427_01
Presentation
Entirely dedicated for Machine To Machine (M2M) applications and embedded data services, the modem
GenPro 25e combines both GSM/GPRS functions in the same robust casing.
The modem is Quad-Bands 850/900/1800/1900 MHz and GSM/GPRS Class 10.
The GenPro 25e provides 3 operating modes:
Direct mode (transparent mode application): the control is done by an external application. The
modem is used with the AT commands set of the GSM/GPRS module (see
ublox_AT_Commands_Manual_xxx.pdf
Autonomous mode (EasePro application): Once configured, the modem is autonomous, it
automatically transmits the information to the client application via different services: GSM SMS and
GPRS UDP/TCP/FTP/SMTP (see EG_EasePro_V2xx_CL_yyy_UK.pdf).
Specific development mode: the EGM development tool allows the development of a customized
application. For more information about the tools and trainings, please contact our sales department.
The GenPro 25e provides digital inputs/outputs allowing the creation of embedded telematic solutions with
high added value.
This document describes the modem and provides the following information:
- General presentation,
- Functional description,
- Available basic services,
- Installation and use of the modem (first level),
- Trouble shooting,
- Accessories recommended for the use of the modem.
- Options, contact us
For more information about this document, ERCO & GENER puts at your disposal the following elements:
- Command List
Direct mode ............ : ublox_AT_Commands_Manual_xxx.pdf
Autonomous mode . : EG_EasePro_V2xx_CL_yyy_UK.pdf
- Application Note ......... : EG_GenPro25e_1055_AN_xxx_yy
- Release Note ............. : EG_GenPro25e_1055_RL_xxx_yy
- Client support (Hot-Line)