User Manual

Step 4

Hang the TV onto the Arm Assembly/Wall Plate [01A]

5/16in.(8mm)

Socket Wrench

(Not lncluded)

3C-3

HEAVY! You may need

assistance with this step.

Phillips

Screwdriver

(Not lncluded)

4-1 Hang the TV to the arm assembly/wall plate [01A], making sure the upper

bolt hangs on the hook on the arm assembly/wall plate [01A].

4-2 Tighten the bolt [S1] to secure the TV to the arm assembly/wall plate [01A].

4-3 Tighten the bolt [S2].

Step 4

4-1

4-2

Install the arm assembly/wall plate [01A]

using lag screws [A1], washers [A2] and

anchors [A3]. Tighten the lag screws [A1]

only until the washers [A2] are pulled

ﬁrmly against the arm assembly/wall

plate [01A] . DO NOT over-tighten the

lag screws [A1].

TV5

4-3