Auto Pet Oasis Manual

5. Insert the flow tube into the opening in the body and
push/snap into place. Insert the bottle stand, position and
push into place.
6. Clean bottle prior to use. Unscrew the valve from the
bottom of the water bottle and fill the container with
water. Using the bottom handle fill the container with
potable (drinking) water.
7. Screw the valve back to the bottom of the bottle.
9. Plug the pump wire to the transformer and plug the
transformer to any 110VAC outlet. Replace the filter
cover on the body.
8. Turn the bottle over and hold the bottle with the top
handle. Place the bottle in the center of the body.
10.You have now finished with the assembly of the
Autopetoasis. The pump should now pump the
water through the filter and the water should be
flowing to the bowl. Your pet can now enjoy clean,
fresh aerated drinking water from your new
Autopetoasis.