User's Manual

5-5
TAIL PITCH CONTROL LEVER INSTALLATION
5-6
TAIL FIN ATTACHMENT
29
3mm Lock Nut
........4 pc
3x8mm Socket Head Bolt
........2 pc
3x10mm Socket Head Bolt
........1 pc
3x12mm Socket Head Bolt
........2 pc
2x20mm Socket Head Bolt
.......1 pc
2mm Flat Washer
........1 pc
Tail Lever Bushing
........1 pc
3x12mm Self Tapping Screw
........3 pc
2x8 Flat Head Screw
........1 pc
Steel Joint Ball
........1 pc
* Do not completly secure these
bolts as this assembly will need to be
correctly positioned in Step 5-10.
* Note: Please attach the Tail Boom
Decal Stripe (located on the decal
sheet) prior to attaching the horizontal
fin/brace clamp.
Tail Lever Bushing
2x20mm Socket Head Bolt
3x10mm Socket Head Bolt
Vertical Fin
Horizontal Fin
3x12mm Self Tapping
Screw (3 pc)
*3x12mm Socket Head Bolt (2 pc)
*3x8mm Socket Head Bolt (2 pc)
Horizontal Fin/Brace Clamp (L&R) * Tail Boom Decal Stripe
3mm Lock Nut (4 pc)
2x8mm Flat
Head Screw
Steel Joint Ball
Tail Pitch Control Lever
Snap
Onto
Ball
2mm Flat Washer