User's Guide Neo-Flex™ Mobile Media Center, LD with 90˚ Portrait/Landscape rotation Holds displays with the following VESA mounting hole pattern: • 100 x 100 mm • 200 x 200 mm • 200 x 300 mm • 300 x 200 mm • 300 x 300 mm • 400 x 200 mm • 400 x 300 mm • 500 x 200 mm • 500 x 300 mm • 600 x 200 mm • 600 x 300 mm • 200 x 400 mm • 300 x 400 mm • 400 x 400 mm • 500 x 400 mm • 600 x 400 mm Holds displays with the following VESA mounting hole pattern: • 75 x 75 mm • 100 x 100 mm • 200 x 100 mm • 200 x 200 mm 25
Features & Specifications Holds displays with the following VESA mounting hole pattern: • 100 x 100 mm • 200 x 200 mm • 200 x 300 mm • 300 x 200 mm • 300 x 300 mm • 400 x 200 mm • 400 x 300 mm • 500 x 200 mm 25 - 50 lbs (11.3 - 22.
Safety Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
Components A B 1x 1x Leg Mounting Hardware 4x 1 1x 1x 1x 2 Leg Cover Mounting Screws M3.5 x 6mm 1x 8x Shelf Mounting Hardware 1x 3 4x M10 x 60mm 4x 8x M3 x 39mm 2x TM Mounting Hardware 1x 1x 2x 4x 4 M6x8mm 2x 4x 1x 2x 4x M8 x 14mm M5 x 16mm 400mm Extension Hardware 2x 5 4x 4x 4x Large Display Cart Hardware m 5.1(ID) x 10(OD) x 12m 4x 5.1(ID) x 10(OD) x 6mm M5 x 16mm 4x m 8.1(ID) x 16(OD) x 12m 4x 4x 4x 4x 6 M6x20mm 4x 8.1(ID) x 16(OD) x 6mm M4x20mm 5.
1a 1x 1x Shipping Box 15mm b Leg Mounting Hardware 4x 4x 2 1x 1x Leg Cover Mounting Screws 1x 8x M3.5 x 6mm CAUTION: DO NOT overtighten fasteners. Overtightening may cause damage to your equipment. 888-24-073-W-03 rev.
3a Shelf Mounting Hardware 2x 2x M3 x 39mm b c Shelf Mounting Hardware 2x 2x M3 x 39mm 6x 2x 6 of 21 888-24-073-W-03 rev.
4 25 - 36 lbs (11.3 - 16 kg) Holds displays with the following VESA mounting hole pattern: • 75 x 75 mm • 100 x 100 mm • 200 x 100 mm • 200 x 200 mm 4 4x 5 25 - 50 lbs (11.3 - 22.
25 - 36 lbs (11.3 - 16 kg) 7 Check size of TV/Monitor hole pattern TV/Monitor Hole Pattern Sizes VESA Adapter Configurations 100mm (3-15/16”) 75mm (2-15/16”) 100mm (3-15/16”) 200mm (7-7/8”) B 75mm (2-15/16”) 9 100mm (3-15/16”) A 75x75mm 100x100mm 100x200mm 10 200mm (7-7/8”) 200x200mm 200mm (7-7/8”) C 10 200mm (7-7/8”) 8 of 21 200x100mm 10 100mm (3-15/16”) D 888-24-073-W-03 rev.
7 Mount Type A TV/Monitor to Arm A 75x75mm 100x100mm 100mm (3-15/16”) 75mm (2-15/16”) 100mm (3-15/16”) 75mm (2-15/16”) 4x M4 x 12mm 8 888-24-073-W-03 rev.
C 200x200mm B 100x200mm D 200x100mm 100mm (3-15/16”) 200mm (7-7/8”) 100mm (3-15/16”) 200mm (7-7/8”) 200mm (7-7/8”) 7a 200mm (7-7/8”) Mount VESA Adapters to Arm based on TV/Monitor hole pattern size (B, C, or D) . 4x 7b M5 x 7mm Mount Type B, C, or D TV/Monitor to Arm 4x M4 x 12mm 4x M5 x 12mm 4x M6 x 12mm NOTE: To reduce M8 holes for use with M5 screws, or if you have a model with Samsung holder rings, follow the M8M5 KIT instructions on the next page. 11 10 of 21 888-24-073-W-03 rev.
M8M5 KIT Instructions NOTE: Follow this step only if your TV/monitor has M8 holes which need to be reduced to M5. Install M8M5 reducer bushing to TV/Monitor and use M5 x 20 mm monitor screws to secure. 4x 4x M5 x 20mm TV/Monitor Mounting M8 size hole NOTE: Follow this step only for Samsung models using the holder ring. Install M8M5 reducer bushing to TV/Monitor then use M5 x 20 mm monitor screws and Samsung holder ring to secure.
25 - 36 lbs (11.3 - 16 kg) 8 Adjustment Step Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
b Tilt – Forward and Backward 4mm Increase Friction If this product moves too easily, then you'll need to increase friction: Decrease Friction If this product is too difficult to move, then you'll need to decrease friction: CAUTION! The bottom nut will turn during adjustment of the top nut; DO NOT apply any tool to the bottom nut. Serious damage to the Pivot may occur if these instructions are not followed. 9 888-24-073-W-03 rev.
25 - 50 lbs (11.3 - 22.7 kg) 4a TM Mounting Hardware TM Mounting Hardware b 4x 2x 4x 4x M8 x 14mm M6x8mm 5 100 mm 200 mm 16 7 100 mm 300 mm 13mm 400 mm 500 mm 600 mm 600 mm 500 mm 400mm Extension Hardware 400 mm 4x 300 mm 200 mm M5 x 16mm 4x 14 of 21 888-24-073-W-03 rev.
25 - 50 lbs (11.3 - 22.7 kg) 6 FIND APPROPRIATE FASTENERS FOR YOUR DISPLAY: 4x Large Display Cart Hardware 5.1(ID) x 10(OD) x 6mm 4x M4x20mm 4x 4x 4x M6x20mm 8.1(ID) x 16(OD) x 6mm M4x40mm 4x 4x 5.1(ID) x 10(OD) x 18mm 4x M6x45mm M5x20mm 4x 8.1(ID) x 16(OD) x 24mm 4x 4x M5x40mm M8x25mm 4x m 5.1(ID) x 10(OD) x 12m 4x 4x 8x M8x50mm m 8.1(ID) x 16(OD) x 12m 4x 5.3(ID) x 16(OD) x 1.0mm 6.3(ID) x 14(OD) x 1.
a 25 - 50 lbs 100x100mm VESA Plate Hardware b 4x (11.3 - 22.7 kg) 7 M5 x 10mm 100 mm 100 mm Use fastener chosen from Step 6. 200 mm 300 mm y1 = y2 x < 600mm 400 mm 500 mm 600 mm Use fastener chosen from Step 6. MINIMUM THREAD ENGAGEMENT g Tighten screws with at least six, full, 360° revolutions*, but do not over tighten; over tightening may cause damage to display and/or brackets. * Six full turns will ensure a minimum thread engagement roughly equal to the diameter of the screw.
25 - 50 lbs (11.3 - 22.7 kg) TM Mounting Hardware 8a b 2x M5 x 16mm c TM Mounting Hardware 1x a 888-24-073-W-03 rev.
25 - 50 lbs (11.3 - 22.7 kg) 9 Adjustment Step Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
10a Power Strip Hardware 2x b 2x M5x9mm c Cable Management Support Hardware 2x d 12 Cable Management Support Hardware a 1x b 888-24-073-W-03 rev.
c Cable Management Support Hardware 4x 2x NOTE: Leave enough slack in cables to allow full range of motion. d Top Cap Hardware 1x 1x M5x8mm 1x 20 of 21 888-24-073-W-03 rev.
Set Your Workstation to Work For YOU! Learn more about ergonomic computer use at: www.computingcomfort.org Height Position top of screen slightly below eye level. Position keyboard at about elbow height with wrists flat. Distance Position screen an arm's length from face—at least 20” (508mm). Position keyboard close enough to create a 90˚ angle in elbow. Angle Tilt screen to eliminate glare. Tilt the keyboard back 10° so that your wrists remain flat.
