User Manual

12 of 21
888-24-073-W-03 rev. T • 01/19
25 - 36 lbs
(11.3 - 16 kg)
8
14mm
a
Adjustment Step
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly
installed on the product before attempting adjustments. This product should move smoothly and easily through the full
range of motion and stay where you set it. If movements are too easy or diffi cult or if product does not stay in desired
positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the
adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from this product,
resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and
optimum operation.
Increase Lift Strength
If the mounted weight is too heavy or
this product does not stay up when
raised, then you'll need to increase
Lift Strength:
Decrease Lift Strength
If the mounted weight is too light or
this product does not stay down when
lowered, then you'll need to decrease
Lift Strength:
Lift – Up and down