Datasheet
870-03-006 Rev. 10/14/04
• LO3000 Orderguide • 15
CRT Under-Shelf Mounts
CRT Lift Arm
Order a Caddy along with a Suspension Arm or Truck. Choose a Caddy based on the
size and weight of the monitor it will hold.
Part Description Height Monitor Monitor Monitor
Number Adjustment Depth* Width* Weight*
40-002-100 Type 2 12"–15-1/2" 16-1/2" — 40 Ibs
Monitor Caddy (305–394 mm) (419 mm) — (18 kg)
40-004-100 Type 3 13-1/2"–18-1/2" 19" — 65 lbs
Monitor Caddy (343–470 mm) (483 mm) — (29 kg)
40-008-100 Type 4 16-1/2"–22" 22" — 70 lbs
Monitor Caddy (419–559 mm) (559 mm) — (32 kg)
40-013-100 Type 5 16-1/2"–22" — 16-1/4"** 120 lbs
Monitor Caddy (419–559 mm) — (413 mm) (54 kg)
* Monitor depth, width and weight specifications are all listed as maximum measurements.
** For wide-backed monitors; maximum rear monitor width is 16-1/4", measured 15" from front of monitor.
Desk Clamp and
Grommet Mount Base
Suspension
Truck
Mount a CRT monitor below a Suspension Shelf or Security Cabinet with a
Suspension Arm or Truck. Both slide across a shelfs/cabinets underside track and
provide monitor tilt and rotation. Arms also add 6" of height adjustment.
Part Description Weight Horizontal Length
Number Capacity (Pivot-point to pivot-point)
44-322-100 “A” Suspension Arm 15–35 lbs (6.8–16 kg) 13" (330 mm)
44-323-100 “B” Suspension Arm 35–65 lbs (16–30 kg) 13" (330 mm)
44-324-100 “C” Suspension Arm 65–100 lbs (30–45 kg) 13" (330 mm)
42-020-100 Suspension Truck ≤ 100 lbs (≤ 45 kg)
Tilt / rotate adjustment: 20° / 360° Vertical adjustment for Arms: 6" (152 mm)
Suspension
Arm
The 10" Lift Arm features height adjustability, swing and rotation for optimum
ergonomic positioning. Quick-release tabs securely clamp the monitor in place.
Optional Wire Keyboard Holders pull out for quick keypad access.
Part Description Weight Attaches to...
Number Capacity
44-343-100 10" Lift Arm 20–60 lbs
(9.1–27.3 kg)
60-257-100 Desk Clamp Worksurface edge ≤ 3" (76 mm) thick
33-269-100 Grommet Mount Worksurface through hole
3/8"–3-1/2" (10-89 mm) wide, ≤ 4" (102 mm) thick
75-064-009 Wire Keyboard Holder, 2" Drop 10" Lift Arm under platform
75-065-009 Wire Keyboard Holder, 4" Drop 10" Lift Arm under platform
360˚
360˚
6-1/2"
(165 mm)
24"
(610 mm)
2-1/4"
(57 mm)
20"
(508 mm)
2-1/4"
(57 mm)
16-1/2"
(419 mm)
10"
(254 mm)
Type 2 Monitor Caddies, 40-002-100
mounted to Suspension Trucks
Monitor Mounting Solutions
Type 2 Type 5 Type 4
16"
16-1/2"–22"
19"
12"
12"–15-1/2"
14-3/4"
Type 3
12"
13-1/2"–18-1/2"
17-1/2"
16"
16-3/8"
16-1/2"–22"
13-3/4"