Datasheet
E-03-005 rev. 09/29/05 • Flat Panel Mounting Solutions Orderguide • 47
Monitor Interface
Accessories
60-244-007 60-243-007
97-197-200, converts
200x100 mm monitors
into 75x75 mm or
100x100 mm VESA
hole patterns
CPU Holders
80-058-xxx
80-059-xxx
80-061-xxx
80-063-xxx
80-053-xxx
60-542-009,
200x200 mm,
VESA MIS-F Adapter
Interface Plate
Attach your monitor to Ergotron Mounting Solutions with the Quick Mounting Kit – no tools necessary.
The Quick Release Kit makes removal and reattachment of your monitor fast and easy. The Tamper
Resistant Kit secures the lever of the Quick Release Kit.
Part Description Application Shipping
Number Weight
97-182-085, black Quick Mounting Kit, Connects Mounting Solutions to monitor’s 1 lbs
(4) Screws w/ easy-turn VESA FDMI interface (.5 kg)
knob head
60-244-007, black* Quick Release Kit Mounts between 75 mm monitor interface 1 lbs
75 mm & 75 mm Mounting Solutions product interface (.5 kg)
60-243-007, black* Quick Release Kit Mounts between 100 mm monitor interface 1 lbs
100 mm & 100 mm Mounting Solutions product interface (.5 kg)
90-022 Quick Release Tamper Prevents tampering of monitor mounted 1 lbs
Resistant Kit with Quick Release Kit (.5 kg)
(1 screw & hex wrench)
90-023 Quick Release Tamper Prevents tampering of monitors mounted 1 lbs
Resistant Kit with Quick Release Kits (.5 kg)
(10 screws)
60-254-007, black 75 x 75 mm to Mounts 100 x 100 mm monitor to 1 lbs
100 x 100 mm, Ergotron Arm with 75 x 75 mm interface (.5 kg)
Conversion Plate Kit
97-197-200, black 200 x 100 mm Attaches to monitors using the 2 lbs
Adapter Plate Kit VESA MIS-E, C Interface Standard (.9 kg)
60-542-009, black VESA MIS-F Adapter Attaches to large TVs/displays based on a 4 lbs
Interface Plate 200x200 mm VESA MIS-F hole pattern (1.8 kg)
* Fasteners to attach VESA FDMI compliant monitors and most Ergotron adapter interfaces are provided.
However, user may need to supply own fasteners for some applications.
CPU Holders
Mount CPUs in a vertical, tower position. Each holder’s width is adjustable. Four sizes are available to
accommodate equipment 1/2" to 10-3/4" wide.
Part Description Dimensions Weight Shipping
Number H x W x D Capacity Weight
80-053-180, grey CPU Holder, 4" x 10" x 1/2–2-1/4" 40 lbs 3 lbs
80-053-200, black Extra Small (102 x 254 x 13–57 mm) (18.1 kg) (1.4 kg)
80-063-180, grey CPU Holder, 6" x 10" x 1-3/8–3-3/4" 50 lbs 6 lbs
80-063-200, black Small (152 x 254 x 35–95 mm) (22.7 kg) (2.7 kg)
80-058-180, grey CPU Holder, 6-1/2" x 10" x 3-3/8–7-5/8" 100 lbs 10 lbs
80-058-200, black Medium (165 x 254 x 86–194 mm) (45.4 kg) (4.5 kg)
80-059-180, grey* CPU Holder, 14-5/8" x 12" x 5–10-3/4" 150 lbs 14 lbs
80-059-200, black* Large (371 x 305 x 127–273 mm) (68.1 kg) (6.4 kg)
* The Large CPU Holder (80-059-xxx) is not compatible with the Mobile WorkStand.
Note: To attach to Wall Track, Bracket 60-156 is required. To attach to Command Post, order either Bracket
60-157-100 or 60-158-100. Also mounts directly to surface: fasteners supplied by user when direct mounting.
CPU Shelves
Mount CPUs in horizontal, desktop position. Cable through-holes are located in the rear.
Part Description Dimensions Weight Shipping
Number W x D x H Capacity Weight
80-060-100, grey CPU Shelf, 17" x 17" x 5" 100 lbs 16 lbs
80-060-101, black Medium (432 x 432 x 127 mm) (45.4 kg) (7.3 kg)
80-061-100, grey* CPU Shelf, 22" x 20" x 7-1/2" 150 lbs 20 lbs
80-061-101, black* Large (559 x 508 x 191 mm) (68.1 kg) (9.1 kg)
* Do not use CPU Shelf, Large (80-061-xxx) with 2" x 2" Command Posts (20-142-100, 20-143-100). See Note below.
Note: To attach to Wall Track, Bracket 60-156 is required. To attach to Command Post, order either Bracket
60-157-100 (for CPU Shelf, Medium only) or 60-158-100. Also mounts directly to surface: fasteners supplied
by user when direct mounting.
NO
LONGER
AVAILABLE
NO
LONGER
AVAILABLE
NO
LONGER
AVAILABLE