User guide

ManualsBrandsErgotron ManualsOffice Furniture97-864

888-97-354-G-00 rev. A • 09/14

1/5

StyleView® SV43/44 Storage Drawer

User Guide

12.5"

(315 mm)

10.5"

(267 mm)

10.5"

(267 mm)

3.75"

(96 mm)

2.5"

(64 mm)

<0.25 lbs (0.1 kg)< 2 lbs (1 kg)

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド : 日本語

用户指南 : 汉语

Total weight capacity per drawer. Total weight capacity per drawer.

For the latest User Installation Guide please visit: www.ergotron.com

Summary of content (5 pages)

PAGE 1
User Guide StyleView® SV43/44 Storage Drawer or < 2 lbs (1 kg) Total weight capacity per drawer. 2.5" <0.25 lbs (0.1 kg) Total weight capacity per drawer. 10.5" (64 mm) 10.5" (267 mm) (267 mm) 12.5" (315 mm) 3.75" (96 mm) For the latest User Installation Guide please visit: www.ergotron.
PAGE 2
WARNING 14mm (9/16”) IMPACT HAZARD! MOVING PARTS CAN CRUSH AND CUT. Minimize Lift Tension BEFORE: · Removing Mounted Equipment. · Shipping Cart · Storing Cart CAUTION: Close worksurface before opening drawers. Open only one drawer at a time. Do Not push cart when drawers or worksurface are open. When adding more than 3 drawer rows to a LiFe cart, max loading is: LCD: 11 lbs (5 kg) CPU: 10 lbs (4.5 kg) Keyboard/mouse: 2 lbs (0.9 kg) Worksurface: 0 lbs (0 kg) Drawer contents: 2 lbs (0.
PAGE 3
1a Remove the cover in the jack on the bottom of the lowest drawer. b Slide the drawer onto the bottom tracks of the last drawer. 2 Remove the top drawer(s). 888-97-354-G-00 rev.
PAGE 4
3 Secure the bottom drawer by attaching the two screws. 2x M4 x 12mm 4 Replace the top drawer(s). 5 To unlock the storage drawer, turn key counter clockwise 1/4 turn. 888-97-354-G-00 rev.
PAGE 5
6 Adjustment It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.