NEXT A515 User's Guide www.adi-deutschland.
BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BACK Standards and Recommendations Safety and Radio Interference Approvals This product is designed in conformity with the following standards or other normative documents : Safety EMC : EN 60950 : 1992 + A1, A2, A3, A4, A11 : EN 55022 : 1998, EN 55024 : 1998 EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998 EN 61000-3-3 : 1995 to satisfy the basic requirements of Safety and EMC required by following Directives : EMC Directive 89/336/EEC Low Voltage Directive 73/23/EEC & 93/68/EEC Conformity with the above basic r
A515 15" TFT LCD Color Monitor BACK NEXT Contents 1. Introduction ...................................1/20 2. Safety Information .......................1/20 3. Installing the monitor ..................4/20 3-1. Packing List .........................................4/20 3-2. Selecting a suitable location .............5/20 3-3. Connecting the monitor ....................5/20 USB hub ..............................................7/20 3-4. Setting the refresh rate .....................
A515 15" TFT LCD Color Monitor BACK NEXT 1. Introduction This manual contains instructions for installing and operating A515. A515 is a highly ergonomic color display unit.
BACK A515 15" TFT LCD Color Monitor NEXT Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire.
A515 15" TFT LCD Color Monitor BACK NEXT Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
A515 15" TFT LCD Color Monitor 3. Installing the monitor BACK NEXT The following items should be found in the packaging. 3-1. Packing List UK Japan America/Canada Europe South Africa Australia Power cord Signal cable Compact Disc Korea USB cable ! AC/DC Power adapter Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
A515 15" TFT LCD Color Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor ! 1. 2. 3. 4. 5. BACK NEXT Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
BACK A515 15" TFT LCD Color Monitor 6. NEXT Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information.
A515 15" TFT LCD Color Monitor BACK NEXT USB hub The USB hub(Bus-powered mode hub) have 1 upstream port and 2 downstream ports. The upstream port can be connected to the root hub of host PC or other downstream port. Two(2) downstream ports allow to connect another USB device such as USB mouse, joystick, printer etc. 1) 2) The maximum supply current of downstream port is 100mA each when bus-powered mode hub. To activate the USB hub, your host system should have USB capability.
A515 15" TFT LCD Color Monitor BACK NEXT Power Switch / LED Indicator 3-4. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
BACK A515 15" TFT LCD Color Monitor NEXT Preset Timing Table ! If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz. No. 1 2 3 4 5 6 7 8 Resolution Horizontal Frequency Refresh rate 31.5 KHz 31.5 KHz 37.9 KHz 37.9 KHz 46.9 KHz 48.4 KHz 56.5 KHz 60.0 KHz 70.1 Hz 59.9 Hz 72.8 Hz 60.3 Hz 75.0 Hz 60.
BACK A515 15" TFT LCD Color Monitor NEXT 3-5. User’s Environment With the double-hinge structure in the stand, this display unit is designed to Support the following user’s environment. • • • Without special Mounting Devices for VESA FPMPMI Standard, you can hang this display unit on the wall by using 2 holes in the bottom side of stand like the below picture. You can fold the stand and the monitor by pushing STOPPER button.
BACK A515 15" TFT LCD Color Monitor NEXT VESA MOUNT’G • • This display unit supports VESA FPMPMI standard for 75mmx75mm screw mounting by giving 4 screw holes inside the base stand of the unit. The base stand shall be removed before connecting to Specialty Flat Panel Monitor Mounting Device. To buy VESA Flat Panel Monitor Mounting Devices, please contact following information. * Ergotron, Inc.
A515 15" TFT LCD Color Monitor BACK NEXT 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen.
A515 15" TFT LCD Color Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. BACK NEXT Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
BACK A515 15" TFT LCD Color Monitor NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. You can play the movie file to see how to adjust the picture image by clicking each icon or title hereunder. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.
BACK A515 15" TFT LCD Color Monitor NEXT CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen.
BACK A515 15" TFT LCD Color Monitor 5. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
BACK A515 15" TFT LCD Color Monitor NEXT 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
BACK A515 15" TFT LCD Color Monitor Problem NEXT Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
BACK A515 15" TFT LCD Color Monitor Problem The power LED is a orange color NEXT Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
A515 15" TFT LCD Color Monitor 7. Specifications LCD Brightness Response Time Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Input voltage Power consumption Power management Plug & Play OSD menu USB VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) BACK 15"viewable, Diagonal Pixel pitch 0.297 mm, A-Si TFT 250cd/m2(Typ.) 20msec 304 X 228 mm 16.2 million colors R.G.B Analog, 15 pin D-sub Horizontal : 31.0 to 60.
