Orderguide Ergotron CRT Monitor Arm Mounting Solutions ® Ergonomic solutions for any area of your facility 870-03-018, rev. 05/13/04 www.ergotron.com © 2004 Ergotron, Inc.
Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or in part for any purpose other than that authorized by Ergotron, Inc. is prohibited. © 2004 Ergotron, Inc. All rights reserved.
Orderguide CRT Monitor Arm Mounting Solutions Table of Contents Introduction . . . . . . . . . Product Line Overview Sample Configurations Monitor Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed Arms . . . . . . . . . . . . . . . . . 6" Suspension Arms . . . . . . . . . . 10" Lift Arms . . . . . . . . . . . . . . . . 12" Suspension Arms . . . . . . . . . 16" Suspension and Lift Arms . . . N12 Arm for NEMA Environments Extender Arms . . . . . . . . . . . . . . . .
Introduction RT Monitor Arms have the ability to swing, rotate, tilt and lift monitors up to 100 lbs (45.4 kg). These arms offer a wide range of vertical adjustment and horizontal extension capabilities, thus accommodating individual user heights and positioning needs. C Ergotron’s Monitor Arms and Mounting Systems allow installation of a complete computer workstation in tight and congested areas while occupying little or no floor space. Several options are available.
Product Line Overview Monitor Arms Mounting Systems Fixed Arms Suspend Command Posts Keyboard Holders & Trays Wall Tracks Wrist Rests & Mouse Pads Lift 6" Suspension Arms 13" Horizontal Keyboard Solutions 19" Horizontal 10" Lift Arms Wall Brackets 12" Suspension Arms Desk Mounts 16" Arms Peripherals & Accessories CPU Holders & Cabinets Worksurfaces Lift Arm Components Suspend N12 Arms for NEMA environments Monitor Caddies Footrests Extender Arms Monitor Platforms Cable Management
Sample Configurations Configure your own customized solutions with Ergotron’s modular components. Here are some examples of common configurations.
Sample Configurations Configure your own customized solutions with Ergotron’s modular components. Here are some examples of common configurations.
Monitor Arms Fixed Arms Fixed Arms swing, and rotate monitors to the point of need. Their tilt control extends a monitor’s vertical viewing range. These arms can be used with a Monitor Caddy in a suspend mode, or turned over and used with a Monitor Platform in a platform mode. Without Shroud With Shroud 2.75 Part Number Description Horizontal Length (pivot point to pivot point) Weight Capacity 44-311-000 20" Fixed Arm without Shroud 20" (508 mm) 100 lbs (45.
Monitor Arms 10" Lift Arm This versatile arm offers lift, swing and rotate capabilities. It adjusts 10 inches (254 mm) vertically. Includes Monitor Platform and Quick-Release Tabs to secure the monitor in place. Mount to vertical surfaces or to horizontal surfaces. If mounting to a horizontal surface, choose the Desk Clamp, which attaches to an edge up to 3" (76 mm) thick, or the Grommet Mount, which attaches through a hole 3/8" to 3" (10 to 76 mm) wide and up to 4" (102 mm) thick. 16.5" 17.
Monitor Arms 16" Suspension and Lift Arms Sixteen inches (406 mm) of vertical movement provides true ergonomic adjustability in sitting or standing applications. It even accommodates the average sit-to-stand height-range. This arm features clean styling and built-in cable management. It’s available as a suspension arm (use with Caddy) or a lift arm (use with Platform). Raise, swing, tilt or rotate your monitor. 16" Suspension Arm 24.76 21.69 4.
Monitor Arms N12 Arm for NEMA Environments The N12 Suspension Arm meets UL requirements for the NEMA standard, allowing you to mount enclosures in NEMA 12 environments. Features include 16 inches (406 mm) of vertical adjustment and hassle-free cable management. An integrated quick-connect tube offers an industry proven universal connection interface while allowing continuous isolation of cables.
Arm Components Monitor Caddies Monitor Caddies are used in conjunction with Suspension and Fixed Arms. A monitor is securely cradled within the Caddy. Choose a Caddy appropriate to your monitor’s size. The Caddy’s telescoping frame further adjusts to an individual monitor’s height. Part Number Description Height Adjustment Monitor Depth* Monitor Width* Weight Capacity* 40-002-000 Type 2 Monitor Caddy 12"–15-1/2" (305–394 mm) 16-1/2" (419 mm) — 40 lbs (18.
Mounting Systems Command Posts The Command Post uses little or no floor space. Attach to the floor, suspend from the ceiling, or clamp to a machine or workbench (choose appropriate mounting hardware from the table below). It provides one standard interface that will mount multiple components. Choose a length of post that accommodates your monitor requirements and the size/number of components you wish to mount. Brackets are required to mount arms and peripherals to post unless noted otherwise (pgs.
Mounting Systems Bases for Command Posts Base for Command Post 90-018, Hardware Kit for Base for attaching base to concrete surface Caution: Surface construction varies and the ultimate mounting method you use to attach an Ergotron mounting system is out of Ergotron’s control. It is important to consult with the appropriate local engineering, architectural, or construction personnel to ensure that an Ergotron mounting system is mounted properly to handle applied loads.
Mounting Systems Second Component Fastener Kits for Command Posts 97-097-099 Bracket for Arm to Post Mount a second component to the 3" x 3" or 4" x 4" Post Brackets by ordering one of these Fastener Kits. Part Number Description 97-095-099 Fastener Kit, Suspension, Lift or Fixed Arm 97-096-099 Fastener Kit, Extender Arm 97-097-099 Fastener Kit, CPU Holder Note: When mounting Extender Arm or multiple monitor arms to Command Post, use 4" x 4" Post only.
Mounting Systems Wall Tracks 60-151-099 60-188-099 The Wall Track mounting system is a flexible, low-cost mounting method that occupies zero floor space. This system attaches to most vertical surfaces – such as walls, pillars, and machines – and provides one standard interface that will mount multiple Ergotron components anywhere along its length. Choose a length of Wall Track that will accommodate the size and number of components you wish to mount.
Mounting Systems Wall Bracket The Wall Bracket allows mounting of any monitor arm directly to a wall or solid structure, like a machine or pillar. This economical solution adds the extra support you need. Part Number Description Dimensions WxH Arm Fasteners 60-152-000 Wall Mounting Bracket with arm fasteners 6-5/8" x 8" (168 x 203 mm) (6) 3/8"-16 x 3/4" carriage bolt Note: Fasteners that attach Wall Bracket to wall are not supplied by Ergotron.
Keyboard Solutions Keyboard Holders, Trays & Arms 75-052-009 Wire Keyboard Holders: Store your keyboard out of the way, then pull it out when needed. Tilt up or down in 15˚ increments. Keyboard Holders mount under Caddies and Platforms. Part Number Description Dimensions WxDxH Weight Capacity 75-052-009 Wire Keyboard Holder 2" drop, pull-out 12-7/8" x 23-1/2" x 4-1/2" (327 x 597 x 114 mm) 15 lbs (6.
Peripherals and Accessories CPU Holders, Shelves and Cabinets 80-063-000 Small CPU Holder 80-058-000 Medium CPU Holder 80-059-000 Large CPU Holder CPU Holders: Mount CPUs in a vertical, tower position. Each holder’s width is adjustable. Three sizes are available to accommodate equipment 1-3/8" to 10-3/4" wide. Mount to Command Post, Wall Track, or directly to a vertical surface.
Peripherals and Accessories Peripheral Table Fold-Away Underbracing and Peripheral Table shown in up position (above) and down position (below) The Peripheral Table provides a solid, laminated surface for writing or holding equipment. Comes in Grey Millstone finish. Configure it with either a Fixed or Fold-Away Underbracing. Mount to Command Post, Wall Track, or directly to a vertical surface.
Peripherals and Accessories Footrest Install the Footrest on the Command Post or directly to a vertical surface to provide more ergonomic comfort to the user. Part Number Description Dimensions WxD Weight Capacity 85-023-000 Footrest 19" x 9-1/2" (483 x 241 mm) 200 lbs (90.8 kg) Note: To mount Footrest to Command Post, bracket is required. See page 15.
Appendix Weight Capacity Fixed Arms . . . . . . . . . . . . . 6" Suspension Arms 6" x 13" “A” . . . . . 6" x 13" “B” . . . . . 6" x 19" “A” . . . . . 6" x 19" “B” . . . . . 6" x 19" “C” . . . . . 10" Lift Arm . . . . . . . . . . . . 12" Suspension Arm . . . . . . 16" Lift & Suspension Arms N12 Suspension Arm . . . . . Extender Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 lbs (45.4 kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix Hole Patterns Wall Track Hole Pattern 3" x 3" Post Hole Pattern 4" x 4" Post Hole Pattern 16-9/16" 13-3/8" 4" (421 mm) (340 mm) (102 mm) 6-11/16" 8-9/32" (169 mm) (210 mm) 1" (25.4 mm) Center lines 6-11/16" (169 mm) ø 9/16" 13-3/8" Center lines 8-9/32" (14 mm) 8" (203 mm) (210 mm) ø 9/16" (14 mm) 1-3/8" (340 mm) (35 mm) 16-9/16" 1-13/64" (421 mm) 11-13/32" (30.
Appendix Computer Carts HD-2 Series – Flat Panel Monitor Deluxe Configuration No matter how demanding the mobile computing application, or what type of computing equipment you need to mobilize, Ergotron has a computer cart to get the job done. Ergonomic design, versatile cable management, high-quality components and rugged construction let you go mobile with confidence and stay mobile over the long term.
Appendix Other Keyboard/ Laptop Mounts Several keyboard and laptop mounting products are available from Ergotron. Choose from arms and pivots that extend, raise, swing and/or tilt a keyboard to the point of use. Keyboard and Mouse Trays featured on page 18 of this guide are compatible with these products.Use with Command Post, Wall Track and other mounting options. Composed of steel and high-impact plastic, these arms and pivots are built to last.
Appendix Ergonomics Data To obtain optimum performance from a workstation, consider the following topics during installation: 1. The adjustment range of the product. 2. The use-mode of the product… a. Monitoring only? b. Data entry? c. User will be sitting? d. User will be standing? e. User will be sitting and standing at different times? 3. Vertical mounting height of the product in respect to user(s)… a. Female or male only? b. Female and male both? c.
Appendix Eye Height/Elbow Height Tables — The following tables provide eye height and elbow height data based on anthropometric data for the US population. 5% Female Average Female Average Person Average Male 95% Male Anthropometric Data for Average Range of Users 50% of Population * ** Eye height/elbow height = distance from top of CRT monitor screen to keyboard tray—roughly 21".
Maximize the effectiveness of your computer systems with Ergotron Products ince 1982, Ergotron has designed and engineered products specifically for improving the human interface with computers. Innovative engineering concepts incorporate the human factor into each and every product. With our patented Monitor Suspension technology as the core, Ergotron designs Mounting Solutions that consistently meet the ever changing needs of our customers.
