User`s guide

7 of 17
9
Ø 3/16"
(5 mm)
Ø 1/2"
(13 mm)
f
g
h
M6 x 70mm
10mm
62”-68”
(158-173 cm)
1/4”-20 x 2”
12 3 4
1x
5/32”
ENGLISH
888-61-070-G-02 rev. C • 01/14
NOTE: Use the Ø 3/16” (5 mm) drill bit when drilling directly into the wood stud.
Use the Ø 1/2” (13 mm) drill bit when drilling into the hollow wall for the anchors.
Use hollow wall anchors where ever a screw does not get inserted directly into the
wood stud.
1. Drill the three holes for the top bracket that correspond with the hole option determined on previous page.
2. Drill the bottom two holes.
Insert anchors then attach bracket to wall according to the hole
option determined on previous page. Verify wall bracket is level
before tightening screws.
WOOD STUD
HOLLOW WALL
WOOD STUD
HOLLOW WALL