Specifications

ManualsBrandsErgotron Manualscomputers & electronicsDock Locker

www.ergotron.com

email: sales@ergotron.com

USA 1-800-888-8458

Europe +31 (0)33-45 45 600

China 86-769-86018920

Ergotron, Inc. | 1181 Trapp Road | St. Paul, MN 55121 USA

ASSEMBLY INSTRUCTIONS

Anthro Corporation | 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

Ergotron Dock Locker

for Microsoft Surface Pro 3

and Docking Station

NOTE: Shown with Microsoft Surface Pro 3 and Docking Station, not included.

Product Part#

Dock Locker MLDKYCG

Anthro Corporation is a wholly owned subsidiary of Ergotron Inc., and Ergotron Inc. is a Nortek Company

Revision: January 2015

Summary of content (4 pages)

PAGE 1
A S S E MB LY I NSTR U C TI ONS Ergotron Dock Locker for Microsoft Surface Pro 3 and Docking Station Product Part# Dock Locker MLDKYCG NOTE: Shown with Microsoft Surface Pro 3 and Docking Station, not included. www.ergotron.com email: sales@ergotron.com Anthro Corporation is a wholly owned subsidiary of Ergotron Inc., and Ergotron Inc. is a Nortek Company Anthro Corporation | 10450 SW Manhasset Dr. | Tualatin, OR 97062 Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.
PAGE 2
02 01 A B W E L CO ME PA R TS LI ST Thank you for purchasing the Dock Locker for Microsoft Surface Pro 3 Docking Station. Before beginning installation of your Dock Locker, please review the parts list to verify that your shipment is complete. If you have any questions or if we can help you in any way, please contact us at 800.325.3841. TO O L S A power drill and drill bit (either 1/4" or 1/8" depending on your installation method) may be required for this assembly.
PAGE 3
STEP 1 - S E T T H E D O C K L O C K E R I N PLA C E A ND O PEN I T Select the installation location for your locker. Provide at least 5" of clearance behind the unit. Place the unit in its spot and open it. To unlock the unit, insert the key and turn. To open the unit, push the button on the lock and lift the cover back. IF YOU WILL SECURE YOUR LOCKER TO THE WORKSURFACE USING A BOLT-THROUGH OR SCREW-MOUNT METHOD, GO TO STEP 2.
PAGE 4
STEP 3 INSTALL YOUR DOCK AND SURFACE PRO 3 DEVICE Close the Locker. Feed the cords through the locker, either through the worksurface and into the bottom of the locker or through the back of the locker, in this order. • First, route cord A around the locker to the port on the left side of the dock. • Next, route cords B and C into the locker and through the left window in front of the spring. • Now, route cords H and I into the locker and through the right window.