SIM 90˚ Wall Mount User's Guide Guía del usuario Manuel de l’utilisateur Benutzerhandbuch Gebruikersgids Guida per l’utente ユーザーガイド 用户指南 사용자 안내서 A B C 1x D 2x E 4x 4x 1 5.1(ID) x 10(OD) x 6mm 4x M4x20mm 4x M4x40mm 4x 4x 1x 4x 8.1(ID) x 16(OD) x 6mm 2 4x 4x M5 x 16mm 4x M6x20mm 4x 3 M4 x 6mm M5 x 18mm 8.1(ID) x 16(OD) x 24mm 2x 4x M6x45mm 4x 8x 4 5.3(ID) x 16(OD) x 1.0mm 2x 1x 4x M4 x 10mm M5 x 18mm 5 M5x40mm 5.
CAUTION! DO NOT load above maximum weight capacities. Failure to comply with caution may result in instability leading to equipment damage or personal injury. < 115 lbs (52.2 kg) CPU must be a VESA compliant Thin Client CPU > 32” < 105 lbs (813 mm) (47.6 kg) 19” (480 mm) < 10” < 7 lbs (254 mm) (3.2 kg) < 2.6” < 13.5” (66 mm) (343 mm) < 3 lbs (1.4 kg) 23.6” (600 mm) 19.68” (500 mm) 17” (440 mm) 15.7” (400 mm) 11.81” (300 mm) 7.87” (200 mm) 4.
Attach Bracket to Wall 1 Wood Madera Bois Solide Holzbalkenträger Massief Houten Pilaren Due montanti in legno massiccio 木 木质 나무 Concrete Concreto Béton Massivbeton Beton Cemento コンクリート 水泥质 콘크리트 4 5 Ø 3/16" (5 mm) Ø 3/8" (10 mm) WARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury and/or property damage.
Wood Madera Bois Solide Holzbalkenträger Massief Houten Pilaren Due montanti in legno massiccio 木 木质 나무 a b Stud Finder Localizador de largueros de madera Stud Finder Auswahl von Montagematerial Positiebepaler balken Rilevatore di montanti スタッド ファインダー 螺栓探测器 스터드 파인더 c d 6 Ø 3/16" (5 mm) 888-60-508-W-00 rev.
Concrete Concreto Béton Massivbeton Beton Cemento コンクリート 水泥质 콘크리트 a c b d 4x Ø 3/8" (10 mm) >3-1/8" (80 mm) WARNING: Mounting holes must be at least 3-1/8” (80mm) deep and must be located within solid concrete, not mortar or covering material.
2 4x 4x M8 x 80mm 2 4 1 3 CAUTION: DO NOT OVERTIGHTEN SCREWS! For solid concrete applications, torque screws to 60 in-lbs (6.8 N m). Screws must be fully seated in order to support applied load! The minimum torque for screws in solid wood studs is 60 in-lbs minimum (6.8 N m)while the maximum torque is 82 in-lbs (9.3 N m). Cuidado:: ¡ NO SOBREAPRIETE LOS TORNILLOS ! Los tornillos deben introducirse por completo para soportar el peso del conjunto.
3 200 mm 300 mm 400 mm 440 mm 500 mm 600 mm 4x M5 x 16mm 600 mm 4x 500 mm 440 mm 400 mm 300 mm 200 mm 888-60-508-W-00 rev.
4 Attach Brackets to Display y1 = y2 x < 600mm Find Appropriate Fasteners to Attach Your Display 4x 4x 4x M6x20mm M4x20mm M6x45mm 4x M5x20mm M8x25mm 4x M5x40mm 5.1(ID) x 10(OD) x 6mm 4x 4x M4x40mm 4x 4x 4x 8.1(ID) x 16(OD) x 6mm 5.3(ID) x 16(OD) x 1.0mm 4x 4x 5.1(ID) x 10(OD) x 18mm 6.3(ID) x 14(OD) x 1.0mm 4x 4x M8x50mm 8.
5a 4x M4 x 6mm b c Tamper Proof Option Cut off tab. To remove CPU use a flat head screwdriver to release tab. 888-60-508-W-00 rev.
d 75 x 75 mm 100 x 100 mm 4x M4 x 10mm e 6 2x 7a 888-60-508-W-00 rev.
b 2x 2x M5 x 18mm M5 x 18mm 1x 5-sided wrench llave pentagonal Clef Allen Inbusschlüssel 5-kantige sleutel Chiave a 5 lati 5 角レンチ 5角扳手 5면 렌치 8 90˚ 1x 9 Tilt – Forward and Backward Inclinación (adelante y atrás) Inclinaison : Avant et arrière Neigung – vor und zurück Kantel – Naar voren en naar achteren Inclinazione – Avanti ed Indietro チルト (前後) 倾斜（前后） 기울기 – 앞/뒤로 Follow these instructions to tighten or loosen tension. Siga estas instrucciones para ajustar o aflojar la tensión.
888-60-508-W-00 rev.
