User guide

ManualsBrandsErgotron ManualsOffice FurnitureStyleView Cart

1/12

888-24-257-G-00 rev. B • 04/13

14mm (9/16")

For the latest User Installation Guide and StyleLink Software Download please visit:

Encontrará la versión más reciente del manual de instalación del usuario y el software de StyleLink en:

Si vous souhaitez télécharger le dernier manuel d’installation de l’utilisateur ou le logiciel StyleLink, rendez-vous sur:

Den neuesten Installationsleitfaden für Benutzer sowie den neuesten StyleLink-Softwaredownload  nden Sie unter:

Voor de nieuwste Installatiehandleiding voor de gebruiker en voor het downloaden van StyleLink-software gaat u naar:

Per scaricare le versioni più recenti del manuale di installazione e del software StyleLink, andare al sito:

De senaste versionerna av installationshandledningen och nedladdning av programvaran för StyleLink  nns på:

最新版ユーザインストールガイドとスタイルリンクソフトウェアは次のサイトでダウンロードできます。

请从下列地址获取最新版本的用户安装指南和 StyleLink 软件下载：

사용자 설치 안내서 및 StyleLink 소프트웨어 다운로드는 다음 웹 사이트에서 제공하고 있습니다.

10mm

M4 x 5mm

M4 x 10mm

10x

1x1x

M4 x 8mm

M5 x 12mm

M4 x 8mm

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Nederlands

Benutzerhandbuch - Deutsch

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド : 日本語

用户指南 : 汉语

www.ergotron.com

User Guide

Features & Speci cations .................................................... 2

Set-up ............................................................................ 3 - 10

Adjustment ..................................................................... 8 - 9

Ergonomics ...........................................................................9

Maintenance & Safety ................................................ 10 - 11

Dimensions .........................................................................12

StyleView® SV40

Electronic Medical Records (EMR) Cart

with LCD Mount

IMPORTANT! This product will need tension adjustments once installation is complete.

Make sure all equipment is properly installed on the product before attempting range

of motion or tension adjustments. Any time equipment is added or changed on this

product resulting in a di erent mounted weight, you should repeat the adjustment

steps to ensure safe and optimum operation. This product should move smoothly and

easily through the full range of motion and stay where you set it. If movement is di cult

or the product does not stay where you set it, follow the adjustment instructions to

loosen or tighten the tension to create a smooth, easy motion. Depending on your

product and the adjustment, it may take many turns to notice a di erence.

For local customer care phone numbers visit:

http://contact.ergotron.com

Summary of content (12 pages)

PAGE 1
User Guide StyleView® SV40 Electronic Medical Records (EMR) Cart with LCD Mount For the latest User Installation Guide and StyleLink Software Download please visit: Encontrará la versión más reciente del manual de instalación del usuario y el software de StyleLink en: Si vous souhaitez télécharger le dernier manuel d’installation de l’utilisateur ou le logiciel StyleLink, rendez-vous sur : Den neuesten Installationsleitfaden für Benutzer sowie den neuesten StyleLink-Softwaredownload finden Sie unter: Voor
PAGE 2
Features & Specifications WARNING 1 14mm (9/16”) 10 2 5 4 6 3/7 IMPACT HAZARD! MOVING PARTS CAN CRUSH AND CUT. Minimize Lift Tension BEFORE: · Removing Mounted Equipment. · Shipping Cart · Storing Cart 9 15 2a To Minimize Lift Tension 1. Lower worksurface to lowest position. 2. Turn adjustment nut at top of riser counterclockwise until it stops (Adjustment may require 40-60 revolutions).
PAGE 3
Set-up 1 Release Brake to move riser. 2a 1x 1x 1x b 1x 888-24-257-G-00 rev.
PAGE 4
Set-up 3 1x 4a b 5a 0˚ 0˚ 1x M4 x 5mm b 75x75mm / 100x100mm WARNING 4x M4 x 10mm Impact Hazard! Moving Parts can Crush and Cut. Raise monitor to top of vertical adjustment BEFORE removing. Failure to heed this warning may result in serious personal injury or property damage! 822-310 888-24-257-G-00 rev.
PAGE 5
Set-up 6 Place computer in compartment. Do not place power bricks in compartment. a 4x a 4x 2x 4x M4 x 10mm b b 1x 7 1x WARNING! Power brick should be stored under the storage area. Failure to follow these instructions may cause over heating and result in product damage. 1x 2x M5 x 12mm 2x a b c 888-24-257-G-00 rev.
PAGE 6
Set-up 8a Route power cable down along tower. 1x 1x WARNING DO NOT OPERATE WITHOUT GUARD IN PLACE WARNING! DO NOT OPERATE WITHOUT GUARD IN PLACE. Only remove guard when routing a cable with a large connector through the bottom of the compartment. Replace guard imediately after routing cable. Failure to replace guard my result in equipment damage and or personal injury. 822-447-00 b c d 888-24-257-G-00 rev.
PAGE 7
Set-up e OVERHEATING CAUTION: Failure to follow these cautions may cause overheating and result in equipment damage. • DO NOT OBSTRUCT AIR VENTS! • Computer Fan must face the carts ventilation openings on either side of the compartment. • If your computer does NOT have a fan, remove the 2 side covers and leave them off to increase airflow. If your computer has a fan, removing the 2 side covers for increased airflow is optional. If computer with cables is too wide, then follow these instructions.
PAGE 8
Adjustment 11 It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
PAGE 9
Adjustment c Lift – Up and down Follow these instructions to tighten or loosen tension. 10mm To Stop Independent LCD Lift For heavier Displays or when using a Tablet PC, you can keep the LCD Lift from moving out of position, by installing this screw into one of the three holes on the back of the riser depending on the desired height. With Independent LCD Lift: <14 lbs (6.4 kg) 1x Without Independent LCD Lift: 20 lbs (9 kg) M4 x 8mm WARNING 1. d 2. Pan - Side-to-Side 3.
PAGE 10
Ergonomics Working Moving customize - to your size stow - before you go 1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser as needed. 1 During normal movement, release brake and lower worksurface to lowest position for optimal stability and unobstructed view. 2 Tilt screen for comfortable viewing and to reduce eye and neck strain. 2 Tuck away open trays and return mouse, scanner and other accessories to their places.
PAGE 11
Maintenance & Safety Cleaning and Maintenance The following procedures are not guaranteed to control infection. The hospital infection control administrator or epidemiologist should be consulted regarding cleaning procedures and processes. To avoid risk of electric shock, do not expose electrical components to water, cleaning solutions or other potentially corrosive liquids or substances. Do not immerse Cart or Cart components in liquid or allow liquids to flow into the Cart.
PAGE 12
Dimensions 14.63" (372 mm) 7" - 12" (178-305 mm) 19.5" (495 mm) 50.5" 17" (1282 mm) (432 mm) 2.5" 17.5" 31" - 51" (64mm) (787-1295 mm) 19.75" (445 mm) 2.9" 28.7" (74 mm) (728 mm) (502 mm) 23" - 43" (584-1092 mm) 16.75" (425 mm) 19.25" (489 mm) 12.4" (315 mm) 2" (51 mm) 21" 22.38" 4" (568 mm) (102 mm) (533 mm) CPU Compartment **< 4" * (102 mm) *< 17.63" (448 mm) **< 2.75" (70 mm) < 2.3" (58 mm) < 4" (102 mm) < 12.25" Front View < 2.75" (70 mm) < 1.