User guide

2/12
888-24-257-G-00 rev. B • 04/13
20˚
5˚
24˚
12˚
<3 lbs (1.4 kg)
20"
(508 mm)
5"
(127 mm)
180˚
3/7
2
2a
1
6
10
15
8
5
4
9
0 lbs (0 kg)
<5 lbs (2.3 kg)
<13 lbs (5.9 kg)
EN
Features & Speci cations
Worksurface 2a. Worksurface Lock and Release
Secure Storage for Laptop, Thin Client or CPU
Front Handle
Height Adjustment Brake Handle
Keyboard tray slides out, tilts and allows for right or left mousing with attached mouse holder
Cable Management and Storage for excess cables and power supplies
Front Locking Casters
Scanner Holder
Antimicrobial coating on worksurface
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Height Adjustable LCD Mount attaches LCDs or tablet PC's with 75x75 or 100x100mm mounting
interface
-20 °C
- 4 °F
50 °C
122 °F
Relative
Humidity
Range
5-95% rH
10 °C
50 °F
29 °C
86 °F
Relative
Humidity
Range
5-95% rH
Operational Storage
Weight Capacity
With Independent LCD Lift:
<14 lbs (6.4 kg)
Without Independent LCD Lift:
20 lbs (9 kg)*
* See "How To Eliminate Independent LCD
Lift" section
CAUTION:
If the combined LCD and CPU weight is greater than 27 lbs (12.2 kg) then the CPU must be
mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately).
*Combined LCD and CPU Compartment weight:
<27 lbs (12.2 kg).
WARNING
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Minimize Lift Tension BEFORE:
· Removing Mounted Equipment.
· Shipping Cart
· Storing Cart
To Minimize Lift Tension
1. Lower worksurface to lowest position.
2. Turn adjustment nut at top of riser
counterclockwise until it stops
(Adjustment may require 40-60 revolutions).
Failure to heed this warning may result in
serious personal injury or property damage!
For More information and instructions refer to product
guide at http://4support.ergotron.com or contact
Ergotron Customer Care at 1-800-888-8458.
822-052
14mm (9/16”)
Open Worksurface
Closed Worksurface
CPU Compartment