User guide

9/12
888-24-257-G-00 rev. B • 04/13
c
d
1x
M4 x 8mm
10mm
EN
Adjustment
Follow these instructions to tighten or loosen tension.
Follow these
instructions to
tighten or loosen
tension.
Lift – Up and down
To Stop Independent LCD Lift
For heavier Displays or when using a
Tablet PC, you can keep the LCD Lift from
moving out of position, by installing this
screw into one of the three holes on the
back of the riser depending on the desired
height.
With Independent
LCD Lift:
<14 lbs (6.4 kg)
Without Independent LCD Lift :
20 lbs (9 kg)
Pan - Side-to-Side
WARNING
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
DO NOT remove Stop Screw
without monitor attached.
Doing so will cause monitor pivot to shoot
up rapidly and may cause personal injury.
To Remove Monitor:
1. Remove stop screw while monitor is
attached.
2. Lift monitor to highest postion
.
3. Remove monitor.
Failure to heed this warning may result in
serious personal injury or property damage!
For More information and instructions refer to product
guide at http://4support.ergotron.com or contact
Ergotron Customer Care at 1-800-888-8458.
822-055
1.
2.
3.