User guide

4/28
12˚
90˚90˚
11.8"
(300 mm)
<2 lbs (0.9 kg)
<2 lbs (0.9 kg)
<2 lbs (0.9 kg)
0 lbs (0 kg)
<5 lbs (2.3 kg)
<13 lbs (5.9 kg)
< 2 lbs (1 kg)
<25 lbs (11.3 kg)
90°
6-10 lbs
(2.72-4.5 kg)
A+B
=12-20 lbs (5.4-9.1 kg)
A
B
1.38" - 3.75"
(35-95 mm)
<5 lbs (2.3 kg)
ENGLISH
888-24-318-G-00 rev. C • 12/14
Features & Speci cations
*Combined LCD and CPU Compartment weight: <27
lbs (12.2 kg).
Open Worksurface
Closed Worksurface
CPU Compartment
Weight Capacity
CAUTION:
If the combined LCD and CPU weight is greater than 27 lbs (12.2 kg) then the CPU must be
mounted to the rear of the cart and codec (if present) can be placed into the CPU compartment.
IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all equipment is properly installed on the product before
attempting range of motion or tension adjustments. Any time equipment is added or changed on this product resulting in a di erent mounted weight, you
should repeat the adjustment steps to ensure safe and optimum operation. This product should move smoothly and easily through the full range of motion and
stay where you set it. If movement is di cult or the product does not stay where you set it, follow the adjustment instructions to loosen or tighten the tension to
create a smooth, easy motion. Depending on your product and the adjustment, it may take many turns to notice a di erence.