User guide

18 of 23
1 a bc
2
b
g
c
e
h
a
d
f
3
a b c
888-24-310-G-00 rev. C • 10/14
ENGLISH
Turn o all mounted equipment.
Disconnect Power System from power source.
How to Change Power System Battery
Turn power system o by holding down
the AC Outlet Power button for 1 - 3
seconds. Power light will shut o .
Red
Red
Recycle the battery according to
local regulations.
BATTERY
LEAD
WARNING: RISK OF ELECTRICAL DISCHARGE
• Do NOT swap battery cables, doing so will cause arcing and trip the circuit
breaker.
• Do not remove or replace the batteries while cart is located in an oxygen rich
or hazardous environment, arcing may occur and cause combustion.
• Replace  rst battery before removing second battery to reduce the risk of
cables touching terminals and causing arcing.
• Always replace both batteries!
• Replace  rst battery before removing second battery.
• Replace batteries with same Amp/Hour rating batteries only.
• Only Ergotron-speci ed batteries may be used in the StyleView Power System.
Please call customer care for more details.
• Recycle battery or contact Ergotron for proper battery disposal guidelines.
BATTERY REPLACEMENT
Only the following 40 -Ah lithium battery is compatible with this system:
Valence Model Number: U1-12RT REV2
Ergotron Part Number: 910-434
Installing batteries other than the Valence battery listed above will void the product
warranty and result in power system malfunction. Failure to heed this warning may
result in severe damage to batteries, power module and possible re hazard.
REMPLACEMENT DE LA BATTERIE
Seule la batterie suivante est compatible avec ce système:
Batterie au lithium de 40Ah.
Batterie Valence modèle numéro: U1-12RT REV2
Numéro de pièce Ergotron: 910-434
L’installation de toute batterie autre que la batterie Valence indiquée ci-dessus rendra
nulle la garantie du produit et entraînera le dysfonctionnement du système
d’alimentation. Si vous ne vous conformez pas à cette précaution d’utilisation, les
batteries et le module d’alimentation risquent d’être sérieusement endommagés, ce qui
pourrait provoquer un incendie.
WARNING
AVERTISSEMENT
826-505
Caution: Remove Black (-) before removing Red (+).
Caution: Connect Red (+) before connecting Black (-).
Caution: Do NOT swap battery cables, doing so will cause sparking and trip the circuit breaker.