User guide

20 of 23
1
1
5
5
6
2
2
3
3
4
4
888-24-310-G-00 rev. C • 10/14
ENGLISH
Ergonomics
EQUIPMENT & ACCESSORIES DISPOSAL
1. Please dispose of all batteries in accordance with
local law
2. All Electronics should be recycled through an
electronics recycler.
3. Remaining plastics and metals can be recycled
through a commercial recycler.
Maintenance & Safety
Hazard Symbols Review
The Meaning of Symbols appearing in this Guide, on the Cart or on the Power System
These symbols alert you to a safety condition that demands your attention. You should be able to recognize and
understand the signi cance of the following Safety Hazards if you encounter them on the Cart or within Cart
documentation such as this Set-up Guide.
Working
customize - to your size
1 Set top of monitor screen about one inch below eye level - Release brake
and lift or lower riser
as needed.
2 Tilt screen for comfortable viewing and to reduce eye and neck strain.
3 Pull keyboard tray forward and position mouse tray on right or left, as
needed.
4 Work with elbows bent at about 90° to minimize muscle strain.
5 If the riser moves up and down with di culty, or if it drifts out of set
position, consult the product manual for adjustment information.
6 Stay in charge!
Powered carts should be plugged into outlet as often as possible to keep
battery charged and computer running.
Symbol
Signal Word/
Color
Level of Hazard
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION
Used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in
property damage.
INSTRUCTIONS
Follow operating instructions.
INSTRUCTIONS
Follow operating instructions.
POWER
"ON" / "OFF" (push-push)
NOTE: Each position "ON" / "OFF" is a stable position.
Moving stow - before you go
1 During normal movement, release brake and lower worksurface
to lowest position for optimal stability and unobstructed view.
2 Tuck away open trays and return mouse, scanner and other
accessories to their places. Clear worksurface.
3 Unlock both front casters.
4 Push cart from rear with elbows bent at about 90° to maximize
control and minimize muscle strain.
5 Don’t run out!
Before moving, make sure cord is unplugged from outlet and
hooked to basket for safe travel. Remember, charge battery fully
100% every day!