User Guide StyleView® SV43 Cart with LCD Mount Tools Needed 1 10mm 14mm (9/16") 2 Components A 1 1x 3x 4x 12x 2 1x 3 1x 1x 2x M4 x 5mm 2x 4x ENGLISH M4 x 10mm 8x 1x 2x 5 1x M3.5 x 6mm 4x 1x M4 x 10mm 4 6 B 1x 1x 1x M4 x 8mm 7 8 1x 4mm 1x 3mm 1x 1x 1x 1x 9 1x M4 x 8mm 2x Features & Specifications ............................................... 2 - 4 Set-up ............................................................................ 5 - 14 Adjustment ..............
Features & Specifications WARNING AVERTISSEMENT 14mm (9/16”) 29 °C 86 °F 10 °C 50 °F 50 °C 122 °F -20 °C - 4 °F Relative Humidity 5-95% rH Range Relative Humidity 5-95% rH Range Operational Storage CAUTION: Close worksurface before opening drawers. Open only one drawer at a time. Do Not push cart when drawers or worksurface are open. Failure to follow these instructions may cause the cart to be unstable. IMPACT HAZARD! MOVING PARTS CAN CRUSH AND CUT.
Features & Specifications Part Number Auto-Lock Drawer SV43-1310-0 1 Drawer*/16 compartments SV43-1320-0 2 Drawers*/32 compartments SV43-1340-0 4 Drawers*/28 compartments SV43-1360-0 6 Drawers*/24 compartments SV43-1390-0 9 Drawers*/36 compartments *Auto-Lock Drawer 1 Drawer 2 Drawers 2.5" (64 mm) 4 Drawers 6 Drawers 9 Drawers 10.5" 10.5" (267 mm) (267 mm) 3.75" 12.5" (96 mm) (315 mm) ENGLISH Weight Capacity With Independent LCD Lift: <14 lbs (6.
Features & Specifications 14.63" 19.5" (372 mm) (495 mm) 7" - 12" 17" (178-305 mm) (432 mm) 13.4" 50.5" 3.4" (1282 mm) 3.27" (340 mm) (83 mm) (86 mm) 7.4" (188 mm) 40" (1016 mm) 31" - 51" 8.5" (787-1295 mm) (216 mm) 2.5" 19.75" (64 mm) 15.4" 2.9" 31" (74 mm) (787 mm) (390 mm) 3.7" (95 mm) 17.5" (502 mm) (445 mm) 23" - 43" (584-1092 mm) 16.75" (425 mm) 19.25" (489 mm) 12.4" (315 mm) 2" (51 mm) 21" 22.
Set-up 1 Release Brake to move riser. CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage. ENGLISH 2a 40" (1016 mm) 2 1 2x M3.5 x 6mm b 1x 888-24-298-G-00 rev.
Set-up 3a 1x 1x 1x b 1x 1x ENGLISH c d CAUTION: Close worksurface before opening drawers. Open only one drawer at a time. Do Not push cart when drawers or worksurface are open. Failure to follow these instructions may cause the cart to be unstable. e 6/16 888-24-298-G-00 rev.
Set-up 4 Connect Keyboard and Mouse to USB Hub USB (Type A) USB (Type A) NOTE: Bar Code Scanner should be connected directly to computer USB port. DO NOT connect Bar Code Scanner to the USB Hub. 5a 0˚ 0˚ 1x b M4 x 5mm 75x75mm / 100x100mm WARNING M4 x 10mm Impact Hazard! Moving Parts can Crush and Cut. Raise monitor to top of vertical adjustment BEFORE removing.
Set-up 6 To increase space and improve airflow, power brick may be stored under the storage area. 1x 2x M4 x 12mm b 2x a ENGLISH d c Route power cable down along tower. 1x 1x WARNING DO NOT OPERATE WITHOUT GUARD IN PLACE 8/16 WARNING! DO NOT OPERATE WITHOUT GUARD IN PLACE. Only remove guard when routing a cable with a large connector through the bottom of the compartment. Replace guard imediately after routing cable.
Set-up 7 Place computer and AC power adaptors in compartment. Do not place power bricks near computer or compartment air vents. a 4x 2x a 4x 4x M4 x 10mm b 1x c ENGLISH b 1x Plug the following factory connected cables into your computer. USB: This cable runs from the USB Hub to your computer and uses your computer to power the USB Hub, Keyboard Lights and Fan. (NOTE: Your computer must be turned on for the USB Hub, Keyboard Lights and Fan to function).
Set-up d Placement of CPU's in Secure Storage Area: USFF (Ultra Small Form Factor) Thin Client DO NOT OBSTRUCT AIR VENTS! Obstructing air vents may cause overheating and result in equipment damage. e Center CPU in storage area. To increase space and improve airflow, power brick may be stored under the storage area. 1 2 ENGLISH If computer with cables is too wide, then follow these instructions. f 1x 8 10/16 888-24-298-G-00 rev.
Set-up 9 Adjustment It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
Adjustment c Lift – Up and down Follow these instructions to tighten or loosen tension. 10mm To Stop Independent LCD Lift For heavier Displays or when using a Tablet PC, you can keep the LCD Lift from moving out of position, by installing this screw into one of the three holes on the back of the riser depending on the desired height. 1x With Independent LCD Lift: <14 lbs (6.4 kg) Without Independent LCD Lift: 20 lbs (9 kg) ENGLISH M4 x 8mm WARNING AVERTISSEMENT 1. 2. d Pan - Side-to-Side 3.
Auto-Lock Drawer 11 AutoLock Drawer Battery Pack 6x CAUTION! Only use NiMh rechargeable batteries. Using nonrechargeable batteries may cause product damage. AA Rechargeable Nickel Metal Hydride USB to computer. Batteries may not come fully charged and may need to charge for several hours. To charge ALD batteries computer needs to be powered on and connected to the USB hub. USB to charge ALD batteries. 1x CAUTION: Open only one drawer at a time. Do Not push cart when drawers are open.
Auto-Lock Drawer Unlock Drawer (2 methods): NOTE: All Drawers in row must be closed before a new row can be unlocked. • Enter User PIN (only numbers for available drawer rows flash green), then press desired drawer row number*. • Key - turn clockwise 1/4 turn *Drawer Row Numbers: 1 1 1 1 2 2 2 2 1 3 Lock Drawer: • Wait 4 seconds for lock to engage automatically. NOTE: Always ensure drawer is pushed in all the way and engaged with lock.
Maintenance & Safety Hazard Symbols Review The Meaning of Symbols appearing in this Guide, on the Cart or on the Power System These symbols alert you to a safety condition that demands your attention. You should be able to recognize and understand the significance of the following Safety Hazards if you encounter them on the Cart or within Cart documentation such as this Set-up Guide. EQUIPMENT & ACCESSORIES DISPOSAL 1. Please dispose of all batteries in accordance with local law 2.
Maintenance & Safety Safety Alerts Associated with this Product The following Warnings/Cautions appear in this reference guide or on the cart: NOTE: Failure to adhere to these guidelines may result in equipment damage or personal injury. CAUTION: The lift brake helps stablilize the worksurface and keyboard tray during normal use but it DOES NOT increase load capacity. DO NOT load riser with equipment totaling more than the maximum weight capacity specified by Ergotron.
