User guide

12/16
888-24-298-G-00 rev. A • 08/14
c
d
1x
M4 x 8mm
10mm
ENGLISH
Adjustment
Follow these instructions to tighten or loosen tension.
Follow these instructions to tighten or loosen tension.
Lift – Up and down
To Stop Independent LCD Lift
For heavier Displays or when using a
Tablet PC, you can keep the LCD Lift from
moving out of position, by installing this
screw into one of the three holes on the
back of the riser depending on the desired
height.
With Independent
LCD Lift:
<14 lbs (6.4 kg)
Without Independent LCD Lift :
20 lbs (9 kg)
Pan - Side-to-Side
Raise monitor to top of vertical adjustment BEFORE removing.
DO NOT remove Stop Screw without monitor attached. Doing so will
cause monitor pivot to shoot up rapidly and may cause personal injury.
826-502
1.
2.
3.
Élevez l’écran au plus haut de l’ajustement vertical AVANT de le retirer.
NE retirez PAS la vis d’arrêt avant que l’écran soit xé.
Dans un tel cas, le pivot d'écran se relèverait rapidement et cela pourrait
engendrer des blessures.
WARNING
AVERTISSEMENT
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Failure to heed this warning may result in serious personal
injury or property damage!
www.ergotron.com
DANGER D’IMPACT!
LES PARTIES EN MOUVEMENT PEUVENT ÉCRASER ET COUPER.
Il existe un risque de blessure corporelle ou d’endommagement
matériel en cas de non respect de cet avertissement.