User guide

2/16
888-24-298-G-00 rev. A • 08/14
3/10
2
2a
1
8
7
6
13
15
15
16
12
9
5
4
11
14
ENGLISH
Features & Speci cations
Worksurface 2a. Worksurface Lock and Release
Secure Storage for Laptop, Thin Client or CPU
Front Handle
Height Adjustment Brake Handle
USB Hub connects keyboard and mouse USB cables
Keyboard tray slides out, tilts and allows for right or left mousing with attached mouse holder
Keyboard Light under Front Handle
Keyboard Light Switch
Cable Management and Storage for excess cables and power supplies
Storage Basket and Rear Handle
Front Locking Casters
Quick Reference Card
Scanner Holder
Antimicrobial worksurface and antimicrobial coating on wrist rest
Auto-Lock Drawer (see page 3 for drawer con gurations)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Height Adjustable LCD Mount attaches LCDs or tablet PC's with 75x75 or 100x100mm mounting
interface
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
FCC Compliance Statement
The cart has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Changes or modi cations not expressly approved by Ergotron, Inc. could void the user’s authority to operate the
equipment.
Please contact Ergotron for complete EMC compatibility information.
-20 °C
- 4 °F
50 °C
122 °F
Relative
Humidity
Range
5-95% rH
10 °C
50 °F
29 °C
86 °F
Relative
Humidity
Range
5-95% rH
Operational Storage
WARNING
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Failure to heed this warning may result in serious personal
injury or property damage!
www.ergotron.com
Minimize Lift Tension BEFORE:
Removing Mounted Equipment, Shipping Cart, Storing Cart.
826-501
14mm (9/16”)
AVERTISSEMENT
DANGER D’IMPACT!
LES PARTIES EN MOUVEMENT PEUVENT ÉCRASER ET COUPER.
Il existe un risque de blessure corporelle ou d’endommagement
matériel en cas de non respect de cet avertissement.
Minimisez la tension d’élévation AVANT:
de retirer l’équipement xé, d’expédier le chariot, de stocker le chariot
IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all equipment is properly installed on the product before
attempting range of motion or tension adjustments. Any time equipment is added or changed on this product resulting in a di erent mounted weight, you
should repeat the adjustment steps to ensure safe and optimum operation. This product should move smoothly and easily through the full range of motion and
stay where you set it. If movement is di cult or the product does not stay where you set it, follow the adjustment instructions to loosen or tighten the tension
to create a smooth, easy motion. Depending on your product and the adjustment, it may take many turns to notice a di erence.
CAUTION: Close worksurface before opening drawers. Open
only one drawer at a time. Do Not push cart when drawers or
worksurface are open. Failure to follow these instructions may cause
the cart to be unstable.