User guide

14/29
1
e
f
d
2
1x
c
ENGLISH
888-24-319-G-00 rev. C • 12/14
Set-up
DO NOT OBSTRUCT AIR VENTS!
Obstructing air vents may cause overheating and result in
equipment damage.
If computer with cables is too wide, then
follow these instructions.
Placement of CPU's in Secure Storage Area:
Center CPU in storage area.
Thin ClientUSFF (Ultra Small Form Factor)
To increase space and improve air ow,
power brick may be stored under the storage
area.
WARNING: Fan must always
be running when computer
is on. Operating computer
without fan may lead to
overheating, resulting
in reduced equipment
performance.
Plug the following factory connected cables into your computer.
USB: This cable runs from the USB Hub to your computer and uses your computer to power the USB Hub, Keyboard
Lights and Fan. (NOTE: Your computer must be turned on for the USB Hub, Keyboard Lights and Fan to function).
Optional StyleLink: This USB cable runs from the power system to your computer for StyleLink Software. For more
info on StyleLink visit: http://4support.ergotron.com.
Ethernet: This cable runs from the side of the enclosure to your computer to allow network connection from the
ethernet port on the outside of the enclosure.