User guide

17/29
18
17
1/2"
1/2"
1/2"
1/2"
ENGLISH
888-24-319-G-00 rev. C • 12/14
Set-up
Increase Friction
If this product moves too easily from
side-to-side, then you'll need to
increase friction:
Decrease Friction
If this product is too di cult to move
from side-to-side, then you'll need to
decrease friction:
Increase Friction
If this product moves too easily from
side-to-side, then you'll need to
increase friction:
Decrease Friction
If this product is too di cult to move
from side-to-side, then you'll need to
decrease friction:
Side-to-Side Motion
Move monitor side-to-side through entire range of motion. If it does not stay in place at any
point it will need adjustment - see below. Adjust so side-to-side moving forces are equal.
Adjust Side-to-Side
Tilt Motion
Tilt monitor up and down through entire pivot range of motion. If it does not stay in place or move-
ment in one direction is sti , pivot needs adjustment - see below. Adjust until monitor stays in place
and tilting forces, up or down, are equal.
Adjust Tilt