User guide

4/29
20˚
5˚
24˚
12˚
<2 lbs (0.9 kg)
<2 lbs (0.9 kg)
<2 lbs (0.9 kg)
5"
(127 mm)
0 lbs (0 kg)
<5 lbs (2.3 kg)
<13 lbs (5.9 kg)
90˚90˚
< 2 lbs (1 kg)
A+B< 25 lbs
(11.3 kg)
A
B
11.8"
(300 mm)
< 23 lbs
(10.5 kgs)
<5 lbs (2.3 kg)
ENGLISH
888-24-319-G-00 rev. C • 12/14
With Independent LCD Lift:
6-14 lbs (2.7-6.4 kg)
Without Independent LCD Lift:
20 lbs (9 kg)*
* See "How To Eliminate Independent LCD
Lift" section
Weight Capacity
*Combined LCD and CPU Compartment weight:
<27 lbs (12.2 kg).
Features & Speci cations
Open Worksurface
Closed Worksurface
CPU Compartment
CAUTION:
If the combined LCD and CPU weight is greater than 27 lbs (12.2 kg) then the CPU must be
mounted to the rear of the cart and codec (if present) can be placed into the CPU compartment.
IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all equipment is properly installed on the product before attempting
range of motion or tension adjustments. Any time equipment is added or changed on this product resulting in a di erent mounted weight, you should repeat the
adjustment steps to ensure safe and optimum operation. This product should move smoothly and easily through the full range of motion and stay where you set it. If
movement is di cult or the product does not stay where you set it, follow the adjustment instructions to loosen or tighten the tension to create a smooth, easy motion.
Depending on your product and the adjustment, it may take many turns to notice a di erence.