User guide

ManualsBrandsErgotron ManualsOffice FurnitureStyleView

1/16

888-24-299-G-00 rev. B • 10/14

StyleView® SV43 Cart

with LCD Arm

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド : 日本語

用户指南 : 汉语

14mm (9/16")

M4 x 5mm

5mm

3mm

M4 x 10mm

M3.5 x 6mm

M4 x 10mm

M4 x 8mm

12x

M4 x 12mm

M4 x 8mm

ENGLISH

Features & Speci cations ............................................... 2 - 4

Set-up ............................................................................ 5 - 14

Adjustment ................................................................. 11 - 12

Auto-Lock Drawer ....................................................... 13 - 14

Ergonomics .........................................................................14

Maintenance & Safety ................................................ 15 - 16

For local customer care phone numbers visit: http://contact.ergotron.com

Components

Tools Needed

User Guide

For the latest User Installation Guide and StyleLink Software Download please visit: www.ergotron.com

Summary of content (16 pages)

PAGE 1
User Guide StyleView® SV43 Cart with LCD Arm Tools Needed 1 14mm (9/16") 2 Components A 1 B 1x 3x 4x 12x 2 1x 3 1x 1x 2x M4 x 5mm 2x 4x ENGLISH M4 x 10mm 4 M4 x 10mm 8x 1x 2x 5 1x M3.5 x 6mm 4x 1x 1x 1x 1x 6 M4 x 8mm 7 8 5mm 1x 1x 3mm 1x 1x 1x 9 1x 2x 1x M4 x 8mm Features & Specifications ............................................... 2 - 4 Set-up ............................................................................ 5 - 14 Adjustment ....................
PAGE 2
Features & Specifications 1 2 9 15 14 5 4 8 3/10 7 6 11 15 13 2a 16 12 ENGLISH 1. Height Adjustable LCD Mount attaches LCDs or tablet PC's with 75x75 or 100x100mm mounting interface 2. Worksurface 2a. Worksurface Lock and Release 3. Secure Storage for Laptop, Thin Client or CPU 4. Front Handle 5. Height Adjustment Brake Handle 6. USB Hub connects keyboard and mouse USB cables 7. Keyboard tray slides out, tilts and allows for right or left mousing with attached mouse holder 8.
PAGE 3
Features & Specifications Part Number Auto-Lock Drawer SV43-1210-0 1 Drawer*/16 compartments SV43-1220-0 2 Drawers*/32 compartments SV43-1240-0 4 Drawers*/28 compartments SV43-1260-0 6 Drawers*/24 compartments SV43-1290-0 9 Drawers*/36 compartments *Auto-Lock Drawer 1 Drawer 2 Drawers 2.5" (64 mm) 4 Drawers 6 Drawers 9 Drawers 10.5" 10.5" (267 mm) (267 mm) 3.75" 12.5" (96 mm) (315 mm) <14 lbs (6.4 kg) 7" (178 mm) 0 lbs (0 kg) Open Worksurface <5 lbs (2.
PAGE 4
Features & Specifications 19.5" (495 mm) 4" - 11" 17" (102-279 mm) (432 mm) 13.4" 50.5" 3.27" (1282 mm) (83 mm) (340 mm) 3.4" (86 mm) 7.4" (188 mm) 40" (1016 mm) 31" (787 mm) 8.5" (216 mm) 31" - 51" 2.5" 15.4" (787-1295 mm) (64 mm) (390 mm) 3.7" (95 mm) 17.5" 23" - 43" 19.75" (502 mm) (445 mm) 7"- 8.5" (178-216 mm) (584-1092 mm) 16.75" (425 mm) 19.25" (489 mm) 22.38" 12.4" (315 mm) 2" (51 mm) 21" (568 mm) 4" (102 mm) (533 mm) CPU Compartment **< 4" * (102 mm) *< 17.
PAGE 5
Set-up 1 Release Brake to move riser. 2a 40" (1016 mm) 2 1 2x M3.5 x 6mm b 1x 888-24-299-G-00 rev. B • 10/14 1x 5/16 ENGLISH CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage.
PAGE 6
Set-up 3a 1x 1x b 1x ENGLISH 1x c 1x 6/16 888-24-299-G-00 rev.
PAGE 7
Set-up 4a b c Connect Keyboard and Mouse to USB Hub USB (Type A) ENGLISH USB (Type A) NOTE: Bar Code Scanner should be connected directly to computer USB port. DO NOT connect Bar Code Scanner to the USB Hub. 5a 0˚ 0˚ 1x b M4 x 5mm 75x75mm / 100x100mm WARNING Impact Hazard! Moving Parts can Crush and Cut. 4x M4 x 10mm Raise monitor to top of vertical adjustment BEFORE removing. Failure to heed this warning may result in serious personal injury or property damage! 822-311 888-24-299-G-00 rev.
PAGE 8
Set-up 6 To increase space and improve airflow, power brick may be stored under the storage area. 1x 2x M4 x 12mm b 2x a ENGLISH d c Route power cable down along tower. 1x 1x WARNING DO NOT OPERATE WITHOUT GUARD IN PLACE 8/16 WARNING! DO NOT OPERATE WITHOUT GUARD IN PLACE. Only remove guard when routing a cable with a large connector through the bottom of the compartment. Replace guard imediately after routing cable.
PAGE 9
Set-up 7 Place computer and AC power adaptors in compartment. Do not place power bricks near computer or compartment air vents. a 4x 2x a 4x 4x M4 x 10mm b 1x c ENGLISH b 1x Plug the following factory connected cables into your computer. USB: This cable runs from the USB Hub to your computer and uses your computer to power the USB Hub, Keyboard Lights and Fan. (NOTE: Your computer must be turned on for the USB Hub, Keyboard Lights and Fan to function).
PAGE 10
Set-up d Placement of CPU's in Secure Storage Area: USFF (Ultra Small Form Factor) Thin Client DO NOT OBSTRUCT AIR VENTS! Obstructing air vents may cause overheating and result in equipment damage. e Center CPU in storage area. To increase space and improve airflow, power brick may be stored under the storage area. 1 2 ENGLISH If computer with cables is too wide, then follow these instructions. f 1x 8 10/16 888-24-299-G-00 rev.
PAGE 11
Adjustment 9 a It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
PAGE 12
Adjustment c Lift – Up and down Follow these instructions to tighten or loosen tension. 5mm d Pan – Side-to-side Follow these instructions to tighten or loosen tension. 3mm ENGLISH Set-up 10 12/16 888-24-299-G-00 rev.
PAGE 13
Auto-Lock Drawer 11 AutoLock Drawer Battery Pack 6x CAUTION! Only use NiMh rechargeable batteries. Using nonrechargeable batteries may cause product damage. AA Rechargeable Nickel Metal Hydride USB to computer. Batteries may not come fully charged and may need to charge for several hours. To charge ALD batteries computer needs to be powered on and connected to the USB hub. USB to charge ALD batteries. 1x CAUTION: Open only one drawer at a time. Do Not push cart when drawers are open.
PAGE 14
Auto-Lock Drawer Unlock Drawer (2 methods): NOTE: All Drawers in row must be closed before a new row can be unlocked. • Enter User PIN (only numbers for available drawer rows flash green), then press desired drawer row number*. • Key - turn clockwise 1/4 turn *Drawer Row Numbers: 1 1 1 1 2 2 1 2 2 3 Lock Drawer: • Wait 4 seconds for lock to engage automatically. NOTE: Always ensure drawer is pushed in all the way and engaged with lock.
PAGE 15
Maintenance & Safety Hazard Symbols Review The Meaning of Symbols appearing in this Guide, on the Cart or on the Power System These symbols alert you to a safety condition that demands your attention. You should be able to recognize and understand the significance of the following Safety Hazards if you encounter them on the Cart or within Cart documentation such as this Set-up Guide.
PAGE 16
Maintenance & Safety Safety Alerts Associated with this Product The following Warnings/Cautions appear in this reference guide or on the cart: NOTE: Failure to adhere to these guidelines may result in equipment damage or personal injury. CAUTION: The lift brake helps stablilize the worksurface and keyboard tray during normal use but it DOES NOT increase load capacity. DO NOT load riser with equipment totaling more than the maximum weight capacity specified by Ergotron.