User guide

ManualsBrandsErgotron ManualsOffice FurnitureStyleView

1/15

888-24-297-G-00 rev. A • 08/14

14mm (9/16")

ABC

9x 1x

M3.5 x 6mm

M4 x 8mm

M4x12mm

StyleView® SV43 Cart

with Laptop Mount

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ユーザーガイド : 日本語

用户指南 : 汉语

ENGLISH

Features & Speci cations ............................................... 2 - 4

Set-up .............................................................................5 - 13

Adjustment ........................................................................ 11

Auto-Lock Drawer ....................................................... 12 - 13

Ergonomics .........................................................................13

Maintenance & Safety ................................................ 14 - 15

For local customer care phone numbers visit: http://contact.ergotron.com

For the latest User Installation Guide and StyleLink Software Download please visit: www.ergotron.com

User Guide

Components

Tools Needed

Summary of content (15 pages)

PAGE 1
User Guide StyleView® SV43 Cart with Laptop Mount Tools Needed 1 14mm (9/16") 2 Components A 1x 2 9x 3 C 3x 1x 1x 1x M4 x 8mm 1x ENGLISH 1 B 1x 2x 4 M3.5 x 6mm 1x 2x 5 6 1x 1x 1x 1x 2x 7 8 2x 2x 1x 1x M4x12mm Features & Specifications ............................................... 2 - 4 Set-up .............................................................................5 - 13 Adjustment ........................................................................
PAGE 2
Features & Specifications WARNING AVERTISSEMENT IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all equipment is properly installed on the product before attempting range of motion or tension adjustments. Any time equipment is added or changed on this product resulting in a different mounted weight, you should repeat the adjustment steps to ensure safe and optimum operation.
PAGE 3
Features & Specifications Part Number Auto-Lock Drawer SV43-1110-0 1 Drawer*/16 compartments SV43-1120-0 2 Drawers*/32 compartments SV43-1140-0 4 Drawers*/28 compartments SV43-1160-0 6 Drawers*/24 compartments SV43-1190-0 9 Drawers*/36 compartments *Auto-Lock Drawer 1 Drawer 2 Drawers 2.5" (64 mm) 4 Drawers 6 Drawers 9 Drawers 10.5" 10.5" (267 mm) (267 mm) 3.75" 12.5" (96 mm) (315 mm) ENGLISH Weight Capacity 20" (508 mm) 12˚ Worksurface <5 lbs (2.
PAGE 4
Dimensions 19.5" (495 mm) 50.5" 17" 31" - 51" (1282 mm) 3.27" (432 mm) (787-1295 mm) (83 mm) 13.4" 3.4" (340 mm) 7.4" (86 mm) (188 mm) 2" 8.5" 40" (1016 mm) (50 mm) 2.5" (216 mm) (64 mm) 19.6" (499 mm) 15.4" 17.5" (390 (445 mm) mm) 17.2" 17.5" (438 mm) (445 mm) 30.75" 3.7" (95 mm) (781 mm) 23" - 43" (584-1092 mm) 16.75" (425 mm) 12.4" (315 mm) 2" (51 mm) 21" 19.25" 4" (489 mm) (102 mm) 22" (533 mm) (562 mm) Laptop Compartment 2.
PAGE 5
Set-up 1a Release Brake to move riser. CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage. b ENGLISH 2a 40" (1016 mm) 2 1 2x M3.5 x 6mm b 1x 888-24-297-G-00 rev.
PAGE 6
Set-up 3 a b ENGLISH c 6/15 888-24-297-G-00 rev.
PAGE 7
Set-up 4a 1x 1x b 1x 1x 5a 1x ENGLISH b Connect Keyboard and Mouse to USB Hub USB (Type A) USB (Type A) NOTE: Bar Code Scanner should be connected directly to computer USB port. DO NOT connect Bar Code Scanner to the USB Hub. 888-24-297-G-00 rev.
PAGE 8
Set-up 6 Set up laptop boosters so the screen fits through the slot in the worksurface and the bottom of the screen is visible when the worksurface is attached. ENGLISH 822-470-00 8/15 888-24-297-G-00 rev.
PAGE 9
Set-up 7a 2x b Plug the following factory connected cables into your computer. USB: This cable runs from the USB Hub to your computer and uses your computer to power the USB Hub and Keyboard Lights. (NOTE: Your computer must be turned on for the USB Hub and Keyboard Lights to function). ENGLISH 1x 888-24-297-G-00 rev.
PAGE 10
Set-up 8 DO NOT OBSTRUCT AIR VENTS! Obstructing air vents may cause overheating and result in equipment damage. If computer with cables are too wide, then follow these instructions. 2 3 ENGLISH 1 4 5 9 10/15 888-24-297-G-00 rev.
PAGE 11
Set-up 10 a c 1x b 1x 1 2 3 4 11 It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
PAGE 12
Auto-Lock Drawer 13 AutoLock Drawer Battery Pack 6x CAUTION! Only use NiMh rechargeable batteries. Using nonrechargeable batteries may cause product damage. AA Rechargeable Nickel Metal Hydride USB to computer. Batteries may not come fully charged and may need to charge for several hours. To charge ALD batteries computer needs to be powered on and connected to the USB hub. USB to charge ALD batteries. 1x CAUTION: Open only one drawer at a time. Do Not push cart when drawers are open.
PAGE 13
Auto-Lock Drawer Unlock Drawer (2 methods): NOTE: All Drawers in row must be closed before a new row can be unlocked. • Enter User PIN (only numbers for available drawer rows flash green), then press desired drawer row number*. • Key - turn clockwise 1/4 turn *Drawer Row Numbers: 1 1 1 1 2 2 2 2 1 3 Lock Drawer: • Wait 4 seconds for lock to engage automatically. NOTE: Always ensure drawer is pushed in all the way and engaged with lock.
PAGE 14
Maintenance & Safety Hazard Symbols Review The Meaning of Symbols appearing in this Guide, on the Cart or on the Power System These symbols alert you to a safety condition that demands your attention. You should be able to recognize and understand the significance of the following Safety Hazards if you encounter them on the Cart or within Cart documentation such as this Set-up Guide. EQUIPMENT & ACCESSORIES DISPOSAL 1. Please dispose of all batteries in accordance with local law 2.
PAGE 15
Maintenance & Safety Configuration & Safety Additional multiple socket-outlet or extension cord shall not be connected to the medical system. When used in a Medical Electrical system, connect only equipment that complies with IEC, ISO, UL/ANSI, or CSA standards that are relevant to that equipment. Risk of shock or personal injury when connecting non-medical equipment supplied as part of a system directly to the wall outlet when non-medical equipment is intended to be supplied by the multiple socket outlet.