User guide

11/15
888-24-297-G-00 rev. A • 08/14
11
1x
10
ab
12
14mm (9/16")
1x
c
12 3 4
M4 x 8mm
1x
ENGLISH
Set-up
Adjustment
Release Brake to move riser.
Follow these
instructions to tighten
or loosen tension.
It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any
time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these
adjustment steps to ensure safe and optimum operation.
Adjustments should move smoothly and easily through the full range of motion and stay where you set it. If adjustments are di cult and
do not stay in the desired position, follow the instructions to loosen or tighten the tension to create a smooth, easy adjustment motion.
Depending on your product and the adjustment, it may take several turns to notice a di erence.
Lift – Up and down
NOTE: Adjustment
may require 40 - 60
revolutions.