User guide

888-97-284-G-01 rev. C • 04/13
5/5
7
14mm (9/16")
Adjustment
It is important that you adjust this product according to the weight of the mounted equipment as described
in the following steps. Any time equipment is added or removed from this product, resulting in a change
in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum
operation.
Adjustments should move smoothly and easily through the full range of motion and stay where you set it. If
adjustments are di cult and do not stay in the desired position, follow the instructions to loosen or tighten
the tension to create a smooth, easy adjustment motion. Depending on your product and the adjustment, it
may take several turns to notice a di erence.
Release Brake to move riser.
Follow these instructions to tighten or loosen tension.
Lift – Up and down
NOTE: Adjustment
may require 40 - 60
revolutions.