User`s guide

7 of 8
888-97-319-W-01 rev. C • 07/13
a
c
b
d
e
2x
M5 x 12mm
1
ENGLISH
a. Remove cap.
b. If present, remove existing accessory by sliding it up off the slot in the riser.
NOTE: loosen screws only, do not remove them.
c. Attach t-nut to scanner shelf with M5x12 screws as illustrated.
d. Slide shelf/nut assembly into slot, adjust shelf to the desired height and tighten the
screws.
Option 4 - Mounting to rear of cart