User's Manual
Table Of Contents
- toc
- 1 Introduction
- 2 Tools and Documentation
- 3 Installation RRU-N
- Introduction
- Target Group
- 3.1 Preconditions
- 3.2 Installation Procedure
- Figure 1 Workflow for Installing the RRU-N
- 3.2.1 Unpacking and Checking the Material
- 3.2.2 Installing RRU-N on a Pole or a Mast
- 3.2.3 Installing RRU-N on a Wall
- 3.2.4 Grounding RRU-N
- 3.2.5 Connecting the 48 V DC Power
- 3.2.6 Connecting Optical Fiber Cable and Setting RRU-N Configura
- 3.2.7 Connecting Antenna Cables
- 3.2.8 Installing the Front Sunshield
- 4 Optional Installation External Splitter/Highway Function
- 5 Optional Installation External Hybrid Combining Unit (EHCU)
- 6 Performing Concluding Routines
- 7 Verifying the Installation
- tables
Performing Concluding Routines
3.
Connect four jumper cables
between the RRU-Ns and the
EHCU.
K000423C
4.
Install the two jumper cables to
the EHCU antenna connectors.
K000423D
Antenna 1
EHCU
Antenna 2
A
B
C
D
C+D
A+B
6 Performing Concluding Routines
This chapter describes the routines to be completed before leaving the site.
Note: Ericsson strongly advises that when cleaning up after installing the
RBS, the personnel performing the installation pay particular attention
to the environment. Primarily, recycle all waste materials that can be
recycled and sort waste so that it can be disposed of according to local
regulations.
27
50/1531-LZA 701 0001 Uen PA4 2008-07-31