User's Manual

E-BTMU
Quick User Guide
5
4.3.3 Setting up Smart Phone Reconnection
If Reconnection mode is enabled, E-BTMU can be connected to Headset or Smart
phone automatically after disconnection.
4.3.4 Showing E-BTMU Information
You can see the version & the MAC address of E-BTMU.
4.3.5 Showing Connected Device Info
You can check the information of which device is connected to.
4.3.6 Setting up E-BTMU Name
You can change the E-BTMU name.
4.3.7 CO Access Code
You can set the CO access code for making a call using the phonebook of the smart
phone.
4.4 Upgrading E-BTMU
You upgrade E-BTMU via FTP Server as the following steps:
1) Select E-BTMU Upgrade and then search for Device.
2) After searching the device, press Soft button ‘UPGRADE’.
3) Download start if the device needs to be upgrade.
4) Phone and E-BTMU will reboot automatically after upgrade successfully.
4.5 Initializing E-BTMU
The following requirements need to be set before initializing E-BTMU.
1) All paired and connected devices are deleted.
2) Smart phone reconnection is set as Disabled.
3) The bell type is 1.
4) The ring volume is set as 5. The ring volume is from 1 to 11.
5) The hands-free Rx volume of Smart phone is set as 5.
6) The volume of Smart phone is set as 5.