User's Manual

E-BTMU
Quick User Guide
7
1. Smart Phone Ring Type
2. Smart Phone Reconnection
3. CO Access Code
4. Discoverable
5. Device Name
Next OK
Previous
6. Local Device Info.
7. Connected Device Info.
Next OK
Previous
1) The message ‘No Paired Smart Phone’ is displayed.
2) Set a smart phone to be discoverable.
3) Press Soft button ‘Search’.
4) The available devices list is displayed.
5) Press Soft button ‘Connect’ to select the device among the list.
6) The message ‘Smart Phone is connected’ is displayed if the connection is
successful.
In case of the device is paired and disconnected:
1) Press Soft button ‘Connect’ to connect the device.
5.2.2 Deleting the device
1) Disconnect the connected smart phone first.
2) Select the device and press Soft button ‘Delete’.
5.2.3 Disconnecting the device
1) Select the device and press Soft button ‘Disconn’.
5.3 Setting up the following menu
5.3.1 Setting up Smart Phone Ring Type
There are 8 ring types and it also supports the ringer off and the default ring. Select
the ring type and press Soft button ‘OK’.