User's Manual

ipLDK-60 Hardware Description and Installation Manual Issue 2
KSU INSTALLATION July, 2010
13
3.2.3.2 Closing the Front Cover
1. Insert the front cover into the slots of the KSU as shown in Figure 3.2.3.2.
2. Then put the front cover down on the KSU in the direction of the arrow, as shown.
3. Turn the screws clockwise to tighten and close the Wiring Tray cover as in the Figure.
FIGURE 3.2.3.2 CLOSING THE FRONT COVER
Note
° Prior to operation, the front cover of the ipLDK-60 should be closed and the screws tightened.