User's Manual

LIP-8040L User Guide Issue 1
27 August, 2008
Individual CO/IP line access—
+ Line number (01-42 for iPECS88 -100, or 001-
& 600). 200 for iPECS-300
CO/IP Group access—
-820 for iP801 ECS-100, or 801-872 for iPECS-
y CO/IP Line access—
300 & 600
An
ing to DTMF style dialing (for banking
dial an IP address
ystem will place the call on the
lls, in which case you will receive a second
ill receive a Call Warning Tone
egardless of a
Station’s dialing restrictions (COS).
9
When dialing on a CO line which uses pulse style
signals, you may activate Dial Pulse to Tone
Switchover chang
services, etc.).
When placing an IP call, you must
using the ‘*’ key in place of the dot.
If Least Cost Routing is set-up, the number you dial
will be analyzed and the s
least expensive route.
You may be assigned Dialing and/or CO/IP Line
Access Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted
number/CO/IP line. CO/IP line and Station Class Of
Service (COS), which establish dialing restrictions, may
vary during Day and Night operation (Day/Night COS).
You may need to enter an
Authorization code before
placing ca
dial tone.
Your external calls may be subject to Call Time
Restrictions, you w
prior to disconnect.
NOTE—In the event of an emergency, assigned
Emergency numbers (ex., a 911 call) may be dialed
from any station in the System, r
To a all:
• Dial the desired number.
pl ce an external c
• Lift the handset,
• Dial the CO/IP line/group,