User's Manual

LIP-8040L User Guide Issue 1
43 August, 2008
7. REMOTE SYSTEM ACCESS
7.1 Direct Inward System Access
(DISA)
DISA (Direct Inward System Access) allows remote
users to gain access to the system’s resources (remote
users may be required to enter an
Authorization Code).
The system will recognize remote user dialed inputs
(call other stations, place calls over CO/IP lines, review
voice mails, etc).
7.2 Mobile Phone Extension
When away from your desk or office you can place and
receive iPECS calls on a registered mobile phone. You
may need to activate the Mobile Phone Extension
feature and assign the Mobile Phone number.
7. Remote System
Access
To access system resources remotely:
• Call the system’s DISA facility,
• Await answer and dial your authorization code (station
number and password),
• Dial as needed for the desired system resource.
To register a mobile phone number:
• Press the
TRANS/PGM button,
• Dial 37,
• Dial the mobile phone number,
/
• Press the
HOLD SAVE button.
To activate a registered mobile phone:
TRANS/PGM button,
• Press the
• Dial 38,
, • 1 to activate, 0 to deactivate
/
• Press the
HOLD SAVE button.
To place a call from the mobile extension using the iPECS
System:
• Dial the ISDN DID number of the station; the system
will check the Caller ID and answer the call. The user
then will receive intercom dial tone,
• Place internal or external iPECS call as normal.