User's Manual
Table Of Contents
- Introduction
- LCD, Speakerphone & Related Features
- Receiving calls
- Placing a call
- Transfer, Conference & Other Call Handling
- Send & Retrieve Messages
- Remote System Access
- Misc. Features
- PBX, Centrex & ISDN features
- Features & Flex buttons
LIP-8040L User Guide Issue 1
49 August, 2008
8.5 Push-To-Talk (PTT) Page
iPECS Phones can be assigned as a member of one or
more of the system’s nine Push-To-Talk (PTT) page
groups. Users separately log-in or log-out of any one or
all PTT groups to which the phone is assigned. Once
logged in, place or receive one-way page
announcements to/from other users who are logged in
to the same PTT group.
8.6 Wake-Up Alarm
iPECS supports an Alarm clock for each station in the
system. The alarm clock can be set to repeat daily or
as a one-time alarm.
When responding to the alarm by lifting the handset,
BGM will be provided.
To log-in to a PTT group:
• Dial #0,
• Dial the desired PTT group number (1-9 or 0 for all
groups),
To log-out of the PTT group(s):
• Dial #0, the PTT Log-in/out code,
• Press the * key.
To place a page announcement to the active PTT group:
• Press and hold the
PTT Flex button,
• After confirmation tone, make page announcement.
To set the Wake Up Alarm clock:
• Press
TRANS/PGM,
• Dial 41 (Alarm Clock code),
• Dial 2-digit hour and minute (hh/mm) for alerting,
• For a daily (repeating alarm), press #,
• Press
HOLD/SAVE.
To erase Wake-Up:
• Press
TRANS/PGM,
• Dial 42 (Alarm Clock delete code),
• Press
HOLD/SAVE.