User's Manual Part 1

LIP-8012D & LIP-8024D User Guide Issue 1
9 August, 2008
2.1.4
The User can review the current network configuration
twork configuration.
ystem
Network Config.
or modify a new phone ne
2.1.5 Attendant menu
The Attendant menu is only available on the S
Attendant phone.
To s:
• Press
MENU Config),
access Network Config. setting
button and 4 (Network
• Enter the pa following will
display:
MF
MFIM # ANGE[#]
ssword (default=147*); the
IM #[1/2] ?
1 - CH
• s the # key to toggle between multiple profiles
xt
Pres
(MFIM),
• Press the
VOL S T buttons to advance to the ne
network configuration item,
• Press the
HOLD/SAVE button to save each setting.
To set de ttings:
• In Netwo
fault Config. se
rk Config. Menu, use
VOL S T buttons to
locate the Default Config. Screen (shown),
SET DEFAULT CONFIG(DOT:*)
• Press the * key.
To exit Config. settings:
• Press the
SPEAKER button,
• Press the *
• Press the # e phone with new
setting.
key to exit, or
key to Reset/Reboot th
To
•
the following will
access the Attendant menu:
Press
MENU button and 5 (Attendant);
display:
1. DATE/TIME SET
2. SET ICM ONLY MODE
3. RESTORE COS
BACK OK