User's Manual Part 1
Table Of Contents
- Introduction
- LCD, Speakerphone & Related Features
- Receiving calls
- Placing a call
- Transfer, Conference & Other Call Handling
- Send & Retrieve Messages
- Remote System Access
- Misc. Features
- PBX, Centrex & ISDN features
- Features & Flex buttons
LIP-8012D & LIP-8024D User Guide Issue 1
12 August, 2008
NOTE—When the BTU is used for a call, the Speaker
button LED will illuminate and the speaker mode
the phone handset is taken off-
ice path will directly
e Speaker
cannot be used. If
hook while in BT mode, the vo
be connected to the handset; press th
button to activate the BTU headset.
• Press the HOLD/SAVE button,
• Press the Next soft button,
Press the OK•
soft button,
Enter the PIN code referring to the Blueto• oth headset
•
manual (default=0000),
Press OK
Soft button.
To unpair the BTU headset:
• set to pairing mode, Set the Bluetooth head
• Press the
TRANS/PGM button,
• Dial *8,
Dial 2 (disable), •
T c tion:
• Press the
TRANS/PGM button,
• Press the OK soft button.
o heck BTU paired informa
• Dial *8,
• Dial 3,
• Press the OK
soft button.
To use the B
• Press th
TU headset:
e
SPEAKER button,
OR
• Press th
• Place ca
To answer a
• When a
present
• Press th
button,
OR
• Lift the
e Call Start button on the BTU headset,
ll as you normally would.
call with the BTU headset:
n incoming call is received, ringing will be
at the Station and the BT headset,
e BT Call Start button, or press the Speaker
handset.